Filters
Question type
Study Flashcards

Stapel Corporation is conducting a time-driven activity-based costing study in its Customer Service Department. The company has provided the following data to aid in that study: Stapel Corporation is conducting a time-driven activity-based costing study in its Customer Service Department. The company has provided the following data to aid in that study: On the Customer Cost Analysis report in time-driven activity-based costing, the cost per minute of the resource supplied would be closest to: A) $0.40 per minute B) $20.00 per minute C) $0.36 per minute D) $18.00 per minute On the Customer Cost Analysis report in time-driven activity-based costing, the cost per minute of the resource supplied would be closest to:


A) $0.40 per minute
B) $20.00 per minute
C) $0.36 per minute
D) $18.00 per minute

E) All of the above
F) A) and D)

Correct Answer

verifed

verified

Lakey Corporation has an activity-based costing system with three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs have already been allocated to the cost pools and total $11,000 for the Machining cost pool, $26,200 for the Setting Up cost pool, and $9,800 for the Other cost pool. Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Data concerning the two products appear below: Lakey Corporation has an activity-based costing system with three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs have already been allocated to the cost pools and total $11,000 for the Machining cost pool, $26,200 for the Setting Up cost pool, and $9,800 for the Other cost pool. Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Data concerning the two products appear below: Required:a. Calculate activity rates for each activity cost pool using activity-based costing.b. Determine the amount of overhead cost that would be assigned to each product using activity-based costing. Required:a. Calculate activity rates for each activity cost pool using activity-based costing.b. Determine the amount of overhead cost that would be assigned to each product using activity-based costing.

Correct Answer

verifed

verified

a.Computation of activity rate...

View Answer

Purchase order processing is an example of a:


A) Unit-level activity.
B) Batch-level activity.
C) Product-level activity.
D) Organization-sustaining activity.

E) B) and C)
F) B) and D)

Correct Answer

verifed

verified

Angara Corporation uses activity-based costing to determine product costs for external financial reports. The company has provided the following data concerning its activity-based costing system: Angara Corporation uses activity-based costing to determine product costs for external financial reports. The company has provided the following data concerning its activity-based costing system: The total amount of overhead cost allocated to Product X would be closest to: (Do not round your intermediate calculations.) A) $353,650 B) $591,600 C) $330,510 D) $506,100 The total amount of overhead cost allocated to Product X would be closest to: (Do not round your intermediate calculations.)


A) $353,650
B) $591,600
C) $330,510
D) $506,100

E) A) and D)
F) A) and C)

Correct Answer

verifed

verified

First-stage allocations in an ABC system should not be based on the opinions of employees about how costs should be distributed among activity cost pools.

A) True
B) False

Correct Answer

verifed

verified

Desjarlais Corporation uses the following activity rates from its activity-based costing to assign overhead costs to products. (Do not round intermediate calculations. Round your final answers to 2 decimal places.) Desjarlais Corporation uses the following activity rates from its activity-based costing to assign overhead costs to products. (Do not round intermediate calculations. Round your final answers to 2 decimal places.) Data concerning two products appear below: Required:a. How much overhead cost would be assigned to Product S96U using the company's activity-based costing system?b. How much overhead cost would be assigned to Product Q06F using the company's activity-based costing system? Data concerning two products appear below: Desjarlais Corporation uses the following activity rates from its activity-based costing to assign overhead costs to products. (Do not round intermediate calculations. Round your final answers to 2 decimal places.) Data concerning two products appear below: Required:a. How much overhead cost would be assigned to Product S96U using the company's activity-based costing system?b. How much overhead cost would be assigned to Product Q06F using the company's activity-based costing system? Required:a. How much overhead cost would be assigned to Product S96U using the company's activity-based costing system?b. How much overhead cost would be assigned to Product Q06F using the company's activity-based costing system?

Correct Answer

verifed

verified

a. Product...

View Answer

Immen Corporation manufactures two products: Product B82O and Product P99Y. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products B82O and P99Y. Immen Corporation manufactures two products: Product B82O and Product P99Y. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products B82O and P99Y. Using the ABC system, how much total manufacturing overhead cost would be assigned to Product B82O? A) $503,000 B) $297,000 C) $396,000 D) $99,000 Using the ABC system, how much total manufacturing overhead cost would be assigned to Product B82O?


A) $503,000
B) $297,000
C) $396,000
D) $99,000

E) None of the above
F) A) and D)

Correct Answer

verifed

verified

Immen Corporation manufactures two products: Product B82O and Product P99Y. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products B82O and P99Y. Immen Corporation manufactures two products: Product B82O and Product P99Y. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products B82O and P99Y. Using the plantwide overhead rate, how much manufacturing overhead cost would be allocated to Product P99Y? A) $503,000 B) $704,200 C) $396,000 D) $301,800 Using the plantwide overhead rate, how much manufacturing overhead cost would be allocated to Product P99Y?


A) $503,000
B) $704,200
C) $396,000
D) $301,800

E) B) and C)
F) None of the above

Correct Answer

verifed

verified

Greife Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs have already been allocated to these cost pools as follows: Greife Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs have already been allocated to these cost pools as follows: Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. The following table shows the machine-hours and number of batches associated with each of the company's two products: Additional data concerning the company's products appears below: Required:a. Calculate activity rates for each activity cost pool using activity-based costing. (Round your answers to 2 decimal places.) b. Determine the amount of overhead cost that would be assigned to each product using activity-based costing. (Round intermediate calculations to 2 decimal places.) c. Determine the product margins for each product using activity-based costing. (Round intermediate calculations to 2 decimal places.) Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. The following table shows the machine-hours and number of batches associated with each of the company's two products: Greife Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs have already been allocated to these cost pools as follows: Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. The following table shows the machine-hours and number of batches associated with each of the company's two products: Additional data concerning the company's products appears below: Required:a. Calculate activity rates for each activity cost pool using activity-based costing. (Round your answers to 2 decimal places.) b. Determine the amount of overhead cost that would be assigned to each product using activity-based costing. (Round intermediate calculations to 2 decimal places.) c. Determine the product margins for each product using activity-based costing. (Round intermediate calculations to 2 decimal places.) Additional data concerning the company's products appears below: Greife Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs have already been allocated to these cost pools as follows: Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. The following table shows the machine-hours and number of batches associated with each of the company's two products: Additional data concerning the company's products appears below: Required:a. Calculate activity rates for each activity cost pool using activity-based costing. (Round your answers to 2 decimal places.) b. Determine the amount of overhead cost that would be assigned to each product using activity-based costing. (Round intermediate calculations to 2 decimal places.) c. Determine the product margins for each product using activity-based costing. (Round intermediate calculations to 2 decimal places.) Required:a. Calculate activity rates for each activity cost pool using activity-based costing. (Round your answers to 2 decimal places.) b. Determine the amount of overhead cost that would be assigned to each product using activity-based costing. (Round intermediate calculations to 2 decimal places.) c. Determine the product margins for each product using activity-based costing. (Round intermediate calculations to 2 decimal places.)

Correct Answer

verifed

verified

a. Computation of activity rat...

View Answer

Desilets Corporation has provided the following data from its activity-based costing accounting system: Desilets Corporation has provided the following data from its activity-based costing accounting system: Distribution of Resource Consumption across Activity Cost Pools: The Other activity cost pool consists of the costs of idle capacity and organization-sustaining costs that are not assigned to products.Required:a. Determine the total amount of supervisory wages and factory utilities costs that would be allocated to the Unit Processing activity cost pool.b. Determine the total amount of supervisory wages and factory utilities costs that would NOT be assigned to products. Distribution of Resource Consumption across Activity Cost Pools: Desilets Corporation has provided the following data from its activity-based costing accounting system: Distribution of Resource Consumption across Activity Cost Pools: The Other activity cost pool consists of the costs of idle capacity and organization-sustaining costs that are not assigned to products.Required:a. Determine the total amount of supervisory wages and factory utilities costs that would be allocated to the Unit Processing activity cost pool.b. Determine the total amount of supervisory wages and factory utilities costs that would NOT be assigned to products. The "Other" activity cost pool consists of the costs of idle capacity and organization-sustaining costs that are not assigned to products.Required:a. Determine the total amount of supervisory wages and factory utilities costs that would be allocated to the Unit Processing activity cost pool.b. Determine the total amount of supervisory wages and factory utilities costs that would NOT be assigned to products.

Correct Answer

verifed

verified

a. Allocations to the Unit Pro...

View Answer

Deemer Corporation has an activity-based costing system with three activity cost pools--Processing, Supervising, and Other. In the first stage allocations, costs in the two overhead accounts, equipment expense and indirect labor, are allocated to the three activity cost pools based on resource consumption. Data used in the first stage allocations follow: Deemer Corporation has an activity-based costing system with three activity cost pools--Processing, Supervising, and Other. In the first stage allocations, costs in the two overhead accounts, equipment expense and indirect labor, are allocated to the three activity cost pools based on resource consumption. Data used in the first stage allocations follow: Distribution of Resource Consumption Across Activity Cost Pools: Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: What is the overhead cost assigned to Product X0 under activity-based costing? (Round your intermediate calculations to 2 decimal places.) A) $4,655 B) $15,028 C) $10,373 D) $25,006 Distribution of Resource Consumption Across Activity Cost Pools: Deemer Corporation has an activity-based costing system with three activity cost pools--Processing, Supervising, and Other. In the first stage allocations, costs in the two overhead accounts, equipment expense and indirect labor, are allocated to the three activity cost pools based on resource consumption. Data used in the first stage allocations follow: Distribution of Resource Consumption Across Activity Cost Pools: Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: What is the overhead cost assigned to Product X0 under activity-based costing? (Round your intermediate calculations to 2 decimal places.) A) $4,655 B) $15,028 C) $10,373 D) $25,006 Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: Deemer Corporation has an activity-based costing system with three activity cost pools--Processing, Supervising, and Other. In the first stage allocations, costs in the two overhead accounts, equipment expense and indirect labor, are allocated to the three activity cost pools based on resource consumption. Data used in the first stage allocations follow: Distribution of Resource Consumption Across Activity Cost Pools: Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: What is the overhead cost assigned to Product X0 under activity-based costing? (Round your intermediate calculations to 2 decimal places.) A) $4,655 B) $15,028 C) $10,373 D) $25,006 What is the overhead cost assigned to Product X0 under activity-based costing? (Round your intermediate calculations to 2 decimal places.)


A) $4,655
B) $15,028
C) $10,373
D) $25,006

E) All of the above
F) A) and C)

Correct Answer

verifed

verified

Howell Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs, which consist of equipment depreciation and indirect labor, are allocated to the cost pools in proportion to the activity cost pools' consumption of resources. Howell Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs, which consist of equipment depreciation and indirect labor, are allocated to the cost pools in proportion to the activity cost pools' consumption of resources. Distribution of Resource Consumption Across Activity Cost Pools Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Additional data concerning the company's products appears below: Required:a. Assign overhead costs to activity cost pools using activity-based costing.b. Calculate activity rates for each activity cost pool using activity-based costing.c. Determine the amount of overhead cost that would be assigned to each product using activity-based costing.d. Determine the product margins for each product using activity-based costing. Distribution of Resource Consumption Across Activity Cost Pools Howell Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs, which consist of equipment depreciation and indirect labor, are allocated to the cost pools in proportion to the activity cost pools' consumption of resources. Distribution of Resource Consumption Across Activity Cost Pools Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Additional data concerning the company's products appears below: Required:a. Assign overhead costs to activity cost pools using activity-based costing.b. Calculate activity rates for each activity cost pool using activity-based costing.c. Determine the amount of overhead cost that would be assigned to each product using activity-based costing.d. Determine the product margins for each product using activity-based costing. Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Howell Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs, which consist of equipment depreciation and indirect labor, are allocated to the cost pools in proportion to the activity cost pools' consumption of resources. Distribution of Resource Consumption Across Activity Cost Pools Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Additional data concerning the company's products appears below: Required:a. Assign overhead costs to activity cost pools using activity-based costing.b. Calculate activity rates for each activity cost pool using activity-based costing.c. Determine the amount of overhead cost that would be assigned to each product using activity-based costing.d. Determine the product margins for each product using activity-based costing. Additional data concerning the company's products appears below: Howell Corporation's activity-based costing system has three activity cost pools--Machining, Setting Up, and Other. The company's overhead costs, which consist of equipment depreciation and indirect labor, are allocated to the cost pools in proportion to the activity cost pools' consumption of resources. Distribution of Resource Consumption Across Activity Cost Pools Costs in the Machining cost pool are assigned to products based on machine-hours (MHs) and costs in the Setting Up cost pool are assigned to products based on the number of batches. Costs in the Other cost pool are not assigned to products. Additional data concerning the company's products appears below: Required:a. Assign overhead costs to activity cost pools using activity-based costing.b. Calculate activity rates for each activity cost pool using activity-based costing.c. Determine the amount of overhead cost that would be assigned to each product using activity-based costing.d. Determine the product margins for each product using activity-based costing. Required:a. Assign overhead costs to activity cost pools using activity-based costing.b. Calculate activity rates for each activity cost pool using activity-based costing.c. Determine the amount of overhead cost that would be assigned to each product using activity-based costing.d. Determine the product margins for each product using activity-based costing.

Correct Answer

verifed

verified

a.Assign overhead costs to activity cost...

View Answer

Lemaire Corporation is conducting a time-driven activity-based costing study in its Customer Support Department. The company has provided the following data to aid in that study: Lemaire Corporation is conducting a time-driven activity-based costing study in its Customer Support Department. The company has provided the following data to aid in that study: On the Capacity Analysis report in time-driven activity-based costing, the total minutes used to meet demand would be closest to: A) 444,930 minutes B) 1,530,000 minutes C) 1,168,310 minutes D) 806,620 minutes On the Capacity Analysis report in time-driven activity-based costing, the "total minutes used to meet demand" would be closest to:


A) 444,930 minutes
B) 1,530,000 minutes
C) 1,168,310 minutes
D) 806,620 minutes

E) A) and C)
F) None of the above

Correct Answer

verifed

verified

Hails Corporation manufactures two products: Product Q21F and Product H44W. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products Q21F and H44W. Hails Corporation manufactures two products: Product Q21F and Product H44W. The company uses a plantwide overhead rate based on direct labor-hours. It is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products Q21F and H44W. Using the ABC system, the percentage of the total overhead cost that is assigned to Product H44W is closest to: A) 39.11% B) 21.30% C) 50.00% D) 17.81% Using the ABC system, the percentage of the total overhead cost that is assigned to Product H44W is closest to:


A) 39.11%
B) 21.30%
C) 50.00%
D) 17.81%

E) A) and C)
F) B) and C)

Correct Answer

verifed

verified

Mirabile Corporation uses activity-based costing to compute product margins. Overhead costs have already been allocated to the company's three activity cost pools--Processing, Supervising, and Other. The costs in those activity cost pools appear below: Mirabile Corporation uses activity-based costing to compute product margins. Overhead costs have already been allocated to the company's three activity cost pools--Processing, Supervising, and Other. The costs in those activity cost pools appear below: Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data appear below: Finally, sales and direct cost data are combined with Processing and Supervising costs to determine product margins. What is the overhead cost assigned to Product M5 under activity-based costing? A) $35,172 B) $23,328 C) $41,000 D) $18,370 Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data appear below: Mirabile Corporation uses activity-based costing to compute product margins. Overhead costs have already been allocated to the company's three activity cost pools--Processing, Supervising, and Other. The costs in those activity cost pools appear below: Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data appear below: Finally, sales and direct cost data are combined with Processing and Supervising costs to determine product margins. What is the overhead cost assigned to Product M5 under activity-based costing? A) $35,172 B) $23,328 C) $41,000 D) $18,370 Finally, sales and direct cost data are combined with Processing and Supervising costs to determine product margins. Mirabile Corporation uses activity-based costing to compute product margins. Overhead costs have already been allocated to the company's three activity cost pools--Processing, Supervising, and Other. The costs in those activity cost pools appear below: Processing costs are assigned to products using machine-hours (MHs) and Supervising costs are assigned to products using the number of batches. The costs in the Other activity cost pool are not assigned to products. Activity data appear below: Finally, sales and direct cost data are combined with Processing and Supervising costs to determine product margins. What is the overhead cost assigned to Product M5 under activity-based costing? A) $35,172 B) $23,328 C) $41,000 D) $18,370 What is the overhead cost assigned to Product M5 under activity-based costing?


A) $35,172
B) $23,328
C) $41,000
D) $18,370

E) A) and B)
F) None of the above

Correct Answer

verifed

verified

Krueger Corporation is conducting a time-driven activity-based costing study in its Customer Support Department. The company has provided the following data to aid in that study: Krueger Corporation is conducting a time-driven activity-based costing study in its Customer Support Department. The company has provided the following data to aid in that study: On the Customer Cost Analysis report in time-driven activity-based costing, the cost per minute of the resource supplied would be closest to: A) $0.45 per minute B) $20.25 per minute C) $0.41 per minute D) $22.50 per minute On the Customer Cost Analysis report in time-driven activity-based costing, the cost per minute of the resource supplied would be closest to:


A) $0.45 per minute
B) $20.25 per minute
C) $0.41 per minute
D) $22.50 per minute

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Eccles Corporation uses an activity-based costing system with three activity cost pools. The company has provided the following data concerning its costs and its activity based costing system: Eccles Corporation uses an activity-based costing system with three activity cost pools. The company has provided the following data concerning its costs and its activity based costing system: Distribution of resource consumption: How much cost, in total, would be allocated in the first-stage allocation to the Assembly activity cost pool? A) $316,233 B) $328,900 C) $486,200 D) $149,600 Distribution of resource consumption: Eccles Corporation uses an activity-based costing system with three activity cost pools. The company has provided the following data concerning its costs and its activity based costing system: Distribution of resource consumption: How much cost, in total, would be allocated in the first-stage allocation to the Assembly activity cost pool? A) $316,233 B) $328,900 C) $486,200 D) $149,600 How much cost, in total, would be allocated in the first-stage allocation to the Assembly activity cost pool?


A) $316,233
B) $328,900
C) $486,200
D) $149,600

E) C) and D)
F) B) and D)

Correct Answer

verifed

verified

Nissley Wedding Fantasy Corporation makes very elaborate wedding cakes to order. The owner of the company has provided the following data concerning the activity rates in its activity-based costing system: Nissley Wedding Fantasy Corporation makes very elaborate wedding cakes to order. The owner of the company has provided the following data concerning the activity rates in its activity-based costing system: The measure of activity for the size-related activity cost pool is the number of planned guests at the wedding reception. The greater the number of guests, the larger the cake. The measure of complexity is the number of tiers in the cake. The activity measure for the order-related cost pool is the number of orders. (Each wedding involves one order.) The activity rates include the costs of raw ingredients such as flour, sugar, eggs, and shortening. The activity rates do not include the costs of purchased decorations such as miniature statues and wedding bells, which are accounted for separately.Data concerning two recent orders appear below: Assuming that all of the costs listed above are avoidable costs in the event that an order is turned down, what amount would the company have to charge for the Tijerina wedding cake to just break even? A) $74.84 B) $222.92 C) $28.90 D) $269.61 The measure of activity for the size-related activity cost pool is the number of planned guests at the wedding reception. The greater the number of guests, the larger the cake. The measure of complexity is the number of tiers in the cake. The activity measure for the order-related cost pool is the number of orders. (Each wedding involves one order.) The activity rates include the costs of raw ingredients such as flour, sugar, eggs, and shortening. The activity rates do not include the costs of purchased decorations such as miniature statues and wedding bells, which are accounted for separately.Data concerning two recent orders appear below: Nissley Wedding Fantasy Corporation makes very elaborate wedding cakes to order. The owner of the company has provided the following data concerning the activity rates in its activity-based costing system: The measure of activity for the size-related activity cost pool is the number of planned guests at the wedding reception. The greater the number of guests, the larger the cake. The measure of complexity is the number of tiers in the cake. The activity measure for the order-related cost pool is the number of orders. (Each wedding involves one order.) The activity rates include the costs of raw ingredients such as flour, sugar, eggs, and shortening. The activity rates do not include the costs of purchased decorations such as miniature statues and wedding bells, which are accounted for separately.Data concerning two recent orders appear below: Assuming that all of the costs listed above are avoidable costs in the event that an order is turned down, what amount would the company have to charge for the Tijerina wedding cake to just break even? A) $74.84 B) $222.92 C) $28.90 D) $269.61 Assuming that all of the costs listed above are avoidable costs in the event that an order is turned down, what amount would the company have to charge for the Tijerina wedding cake to just break even?


A) $74.84
B) $222.92
C) $28.90
D) $269.61

E) A) and B)
F) B) and D)

Correct Answer

verifed

verified

Horgen Corporation manufactures two products: Product M68B and Product H27T. The company is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products M68B and H27T. Horgen Corporation manufactures two products: Product M68B and Product H27T. The company is considering implementing an activity-based costing (ABC) system that allocates its manufacturing overhead to four cost pools. The following additional information is available for the company as a whole and for Products M68B and H27T. Using the activity-based costing system, how much total manufacturing overhead cost would be assigned to Product H27T? A) $291,000 B) $174,000 C) $465,000 D) $454,500 Using the activity-based costing system, how much total manufacturing overhead cost would be assigned to Product H27T?


A) $291,000
B) $174,000
C) $465,000
D) $454,500

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

Lysiak Corporation uses an activity based costing system to assign overhead costs to products. In the first stage, two overhead costs--equipment depreciation and supervisory expense-are allocated to three activity cost pools--Machining, Order Filling, and Other--based on resource consumption. Data to perform these allocations appear below: Lysiak Corporation uses an activity based costing system to assign overhead costs to products. In the first stage, two overhead costs--equipment depreciation and supervisory expense-are allocated to three activity cost pools--Machining, Order Filling, and Other--based on resource consumption. Data to perform these allocations appear below: Distribution of Resource Consumption Across Activity Cost Pools: In the second stage, Machining costs are assigned to products using machine-hours (MHs) and Order Filling costs are assigned to products using the number of orders. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: What is the overhead cost assigned to Product C9 under activity-based costing? A) $26,500 B) $21,942 C) $1,180 D) $23,122 Distribution of Resource Consumption Across Activity Cost Pools: Lysiak Corporation uses an activity based costing system to assign overhead costs to products. In the first stage, two overhead costs--equipment depreciation and supervisory expense-are allocated to three activity cost pools--Machining, Order Filling, and Other--based on resource consumption. Data to perform these allocations appear below: Distribution of Resource Consumption Across Activity Cost Pools: In the second stage, Machining costs are assigned to products using machine-hours (MHs) and Order Filling costs are assigned to products using the number of orders. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: What is the overhead cost assigned to Product C9 under activity-based costing? A) $26,500 B) $21,942 C) $1,180 D) $23,122 In the second stage, Machining costs are assigned to products using machine-hours (MHs) and Order Filling costs are assigned to products using the number of orders. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: Lysiak Corporation uses an activity based costing system to assign overhead costs to products. In the first stage, two overhead costs--equipment depreciation and supervisory expense-are allocated to three activity cost pools--Machining, Order Filling, and Other--based on resource consumption. Data to perform these allocations appear below: Distribution of Resource Consumption Across Activity Cost Pools: In the second stage, Machining costs are assigned to products using machine-hours (MHs) and Order Filling costs are assigned to products using the number of orders. The costs in the Other activity cost pool are not assigned to products. Activity data for the company's two products follow:Activity: What is the overhead cost assigned to Product C9 under activity-based costing? A) $26,500 B) $21,942 C) $1,180 D) $23,122 What is the overhead cost assigned to Product C9 under activity-based costing?


A) $26,500
B) $21,942
C) $1,180
D) $23,122

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

Showing 361 - 380 of 382

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

346 Questions

Exam 2

Job-Order Costing: Calculating Unit Product Costs

408 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

314 Questions

Exam 4

Process Costing

365 Questions

Exam 5

Cost-Volume-Profit Relationships

396 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

392 Questions

Exam 8

Master Budgeting

284 Questions

Exam 9

Flexible Budgets and Performance Analysis

491 Questions

Exam 10

Standard Costs and Variances

469 Questions

Exam 11

Responsibility Accounting Systems

335 Questions

Exam 12

Strategic Performance Measurement

153 Questions

Exam 13

Differential Analysis: the Key to Decision Making

432 Questions

Exam 14

Capital Budgeting Decisions

405 Questions

Exam 15

Statement of Cash Flows

221 Questions

Exam 16

Financial Statement Analysis

327 Questions

Show Answer