Filters
Question type
Study Flashcards

Neuhaus Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Neuhaus Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 52,900 gallons of raw material at a price of $7.60 per gallon. b. Used 46,820 gallons of the raw material to produce 27,600 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) ($355,832) B) $355,832 C) $351,150 D) ($351,150) During the year, the company completed the following transactions: a. Purchased 52,900 gallons of raw material at a price of $7.60 per gallon. b. Used 46,820 gallons of the raw material to produce 27,600 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Neuhaus Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 52,900 gallons of raw material at a price of $7.60 per gallon. b. Used 46,820 gallons of the raw material to produce 27,600 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) ($355,832) B) $355,832 C) $351,150 D) ($351,150) Neuhaus Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 52,900 gallons of raw material at a price of $7.60 per gallon. b. Used 46,820 gallons of the raw material to produce 27,600 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) ($355,832) B) $355,832 C) $351,150 D) ($351,150) -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by:


A) ($355,832)
B) $355,832
C) $351,150
D) ($351,150)

E) B) and D)
F) All of the above

Correct Answer

verifed

verified

Catherman Corporation manufactures one product. It does not maintain any beginning or ending inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. During the year, the company produced and sold 32,400 units at a price of $42.30 per unit. Its standard cost per unit produced is $36.90 and its selling and administrative expenses totaled $102,000. The company does not have any variable manufacturing overhead costs and it recorded the following variances during the year: Catherman Corporation manufactures one product. It does not maintain any beginning or ending inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. During the year, the company produced and sold 32,400 units at a price of $42.30 per unit. Its standard cost per unit produced is $36.90 and its selling and administrative expenses totaled $102,000. The company does not have any variable manufacturing overhead costs and it recorded the following variances during the year: -The net operating income for the year is closest to: A) $107,269 B) $6,150 C) $89,348 D) $72,960 -The net operating income for the year is closest to:


A) $107,269
B) $6,150
C) $89,348
D) $72,960

E) B) and D)
F) C) and D)

Correct Answer

verifed

verified

Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by: A) ($109,800) B) $22,400 C) $109,800 D) ($22,400) The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by: A) ($109,800) B) $22,400 C) $109,800 D) ($22,400) Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by: A) ($109,800) B) $22,400 C) $109,800 D) ($22,400) -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by:


A) ($109,800)
B) $22,400
C) $109,800
D) ($22,400)

E) C) and D)
F) A) and B)

Correct Answer

verifed

verified

Woodhead Inc. manufactures one product. It does not maintain any beginning or ending inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. Its standard cost per unit produced is $37.45. During the year, the company produced and sold 24,400 units at a price of $47.40 per unit and its selling and administrative expenses totaled $92,000. The company does not have any variable manufacturing overhead costs. It recorded the following variances during the year: Woodhead Inc. manufactures one product. It does not maintain any beginning or ending inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. Its standard cost per unit produced is $37.45. During the year, the company produced and sold 24,400 units at a price of $47.40 per unit and its selling and administrative expenses totaled $92,000. The company does not have any variable manufacturing overhead costs. It recorded the following variances during the year: -The net operating income for the year is closest to: A) $259,859 B) $184,605 C) $151,026 D) $150,780 -The net operating income for the year is closest to:


A) $259,859
B) $184,605
C) $151,026
D) $150,780

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by: A) $297,400 B) $462,240 C) ($462,240) D) ($297,400) The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by: A) $297,400 B) $462,240 C) ($462,240) D) ($297,400) Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by: A) $297,400 B) $462,240 C) ($462,240) D) ($297,400) -When applying fixed manufacturing overhead to production in transaction (d) above,the Work in Process inventory account will increase (decrease) by:


A) $297,400
B) $462,240
C) ($462,240)
D) ($297,400)

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials purchases in transaction (a) above,the Cash account will increase (decrease) by: A) ($1,279,650) B) ($1,225,770) C) $1,279,650 D) $1,225,770 The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials purchases in transaction (a) above,the Cash account will increase (decrease) by: A) ($1,279,650) B) ($1,225,770) C) $1,279,650 D) $1,225,770 Robins Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $360,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 134,700 pounds of raw material at a price of $9.10 per pound. b. Used 122,080 pounds of the raw material to produce 32,100 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 26,680 hours at an average cost of $17.20 per hour. d. Applied fixed overhead to the 32,100 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $378,400. Of this total, $297,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $81,000 related to depreciation of manufacturing equipment. e. Completed and transferred 32,100 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials purchases in transaction (a) above,the Cash account will increase (decrease) by: A) ($1,279,650) B) ($1,225,770) C) $1,279,650 D) $1,225,770 -When recording the raw materials purchases in transaction (a) above,the Cash account will increase (decrease) by:


A) ($1,279,650)
B) ($1,225,770)
C) $1,279,650
D) $1,225,770

E) A) and B)
F) B) and D)

Correct Answer

verifed

verified

Alberts Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. The standard cost card for the company's only product is as follows: Alberts Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $240,000 and budgeted activity of 20,000 hours. During the year, the company applied fixed overhead to the 15,200 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $223,700. Of this total, $147,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $76,000 related to depreciation of manufacturing equipment. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production,the Work in Process inventory account will increase (decrease) by: A) ($147,700) B) ($145,920) C) $147,700 D) $145,920 The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $240,000 and budgeted activity of 20,000 hours. During the year, the company applied fixed overhead to the 15,200 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $223,700. Of this total, $147,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $76,000 related to depreciation of manufacturing equipment. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Alberts Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $240,000 and budgeted activity of 20,000 hours. During the year, the company applied fixed overhead to the 15,200 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $223,700. Of this total, $147,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $76,000 related to depreciation of manufacturing equipment. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production,the Work in Process inventory account will increase (decrease) by: A) ($147,700) B) ($145,920) C) $147,700 D) $145,920 Alberts Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $240,000 and budgeted activity of 20,000 hours. During the year, the company applied fixed overhead to the 15,200 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $223,700. Of this total, $147,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $76,000 related to depreciation of manufacturing equipment. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When applying fixed manufacturing overhead to production,the Work in Process inventory account will increase (decrease) by: A) ($147,700) B) ($145,920) C) $147,700 D) $145,920 -When applying fixed manufacturing overhead to production,the Work in Process inventory account will increase (decrease) by:


A) ($147,700)
B) ($145,920)
C) $147,700
D) $145,920

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Lusher Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The standard cost card for the company's only product is as follows: Lusher Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $134,750 and budgeted activity of 24,500 hours. During the year,the company completed the following transactions: a.Purchased 60,100 kilos of raw material at a price of $5.50 per kilo. b.Used 55,250 kilos of the raw material to produce 36,900 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 27,030 hours at an average cost of $23.20 per hour. d.Applied fixed overhead to the 36,900 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $115,250.Of this total,$40,250 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $75,000 related to depreciation of manufacturing equipment. e.Transferred 36,900 units from work in process to finished goods. f.Sold for cash 39,700 units to customers at a price of $33.60 per unit. g.Completed and transferred the standard cost associated with the 39,700 units sold from finished goods to cost of goods sold. h.Paid $171,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet.The beginning balances have been provided for each of the accounts,including the Property,Plant,and Equipment (net)account which is abbreviated as PP&E (net). 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. The company calculated the following variances for the year: Lusher Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $134,750 and budgeted activity of 24,500 hours. During the year,the company completed the following transactions: a.Purchased 60,100 kilos of raw material at a price of $5.50 per kilo. b.Used 55,250 kilos of the raw material to produce 36,900 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 27,030 hours at an average cost of $23.20 per hour. d.Applied fixed overhead to the 36,900 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $115,250.Of this total,$40,250 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $75,000 related to depreciation of manufacturing equipment. e.Transferred 36,900 units from work in process to finished goods. f.Sold for cash 39,700 units to customers at a price of $33.60 per unit. g.Completed and transferred the standard cost associated with the 39,700 units sold from finished goods to cost of goods sold. h.Paid $171,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet.The beginning balances have been provided for each of the accounts,including the Property,Plant,and Equipment (net)account which is abbreviated as PP&E (net). 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $134,750 and budgeted activity of 24,500 hours. During the year,the company completed the following transactions: a.Purchased 60,100 kilos of raw material at a price of $5.50 per kilo. b.Used 55,250 kilos of the raw material to produce 36,900 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 27,030 hours at an average cost of $23.20 per hour. d.Applied fixed overhead to the 36,900 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $115,250.Of this total,$40,250 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $75,000 related to depreciation of manufacturing equipment. e.Transferred 36,900 units from work in process to finished goods. f.Sold for cash 39,700 units to customers at a price of $33.60 per unit. g.Completed and transferred the standard cost associated with the 39,700 units sold from finished goods to cost of goods sold. h.Paid $171,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet.The beginning balances have been provided for each of the accounts,including the Property,Plant,and Equipment (net)account which is abbreviated as PP&E (net). Lusher Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $134,750 and budgeted activity of 24,500 hours. During the year,the company completed the following transactions: a.Purchased 60,100 kilos of raw material at a price of $5.50 per kilo. b.Used 55,250 kilos of the raw material to produce 36,900 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 27,030 hours at an average cost of $23.20 per hour. d.Applied fixed overhead to the 36,900 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $115,250.Of this total,$40,250 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $75,000 related to depreciation of manufacturing equipment. e.Transferred 36,900 units from work in process to finished goods. f.Sold for cash 39,700 units to customers at a price of $33.60 per unit. g.Completed and transferred the standard cost associated with the 39,700 units sold from finished goods to cost of goods sold. h.Paid $171,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet.The beginning balances have been provided for each of the accounts,including the Property,Plant,and Equipment (net)account which is abbreviated as PP&E (net). 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. Lusher Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $134,750 and budgeted activity of 24,500 hours. During the year,the company completed the following transactions: a.Purchased 60,100 kilos of raw material at a price of $5.50 per kilo. b.Used 55,250 kilos of the raw material to produce 36,900 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 27,030 hours at an average cost of $23.20 per hour. d.Applied fixed overhead to the 36,900 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $115,250.Of this total,$40,250 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $75,000 related to depreciation of manufacturing equipment. e.Transferred 36,900 units from work in process to finished goods. f.Sold for cash 39,700 units to customers at a price of $33.60 per unit. g.Completed and transferred the standard cost associated with the 39,700 units sold from finished goods to cost of goods sold. h.Paid $171,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet.The beginning balances have been provided for each of the accounts,including the Property,Plant,and Equipment (net)account which is abbreviated as PP&E (net). 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year.

Correct Answer

verifed

verified

1.& 2.
blured image blured image The explanations for transacti...

View Answer

Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made? A) $650 in the Materials Quantity Variance column B) ($650) in the Materials Price Variance column C) ($650) in the Materials Quantity Variance column D) $650 in the Materials Price Variance column During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made? A) $650 in the Materials Quantity Variance column B) ($650) in the Materials Price Variance column C) ($650) in the Materials Quantity Variance column D) $650 in the Materials Price Variance column Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made? A) $650 in the Materials Quantity Variance column B) ($650) in the Materials Price Variance column C) ($650) in the Materials Quantity Variance column D) $650 in the Materials Price Variance column -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made?


A) $650 in the Materials Quantity Variance column
B) ($650) in the Materials Price Variance column
C) ($650) in the Materials Quantity Variance column
D) $650 in the Materials Price Variance column

E) C) and D)
F) B) and D)

Correct Answer

verifed

verified

Yordy Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The company's balance sheet at the beginning of the year was as follows: Yordy Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The company's balance sheet at the beginning of the year was as follows: The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $220,500 and budgeted activity of 31,500 hours. During the year,the company completed the following transactions: a.Purchased 48,700 kilos of raw material at a price of $9.30 per kilo. b.Used 43,020 kilos of the raw material to produce 30,800 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 28,820 hours at an average cost of $20.20 per hour. d.Applied fixed overhead to the 30,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $208,600.Of this total,$124,600 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $84,000 related to depreciation of manufacturing equipment. e.Transferred 30,800 units from work in process to finished goods. f.Sold for cash 32,200 units to customers at a price of $46.60 per unit. g.Completed and transferred the standard cost associated with the 32,200 units sold from finished goods to cost of goods sold. h.Paid $155,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Enter the beginning balances and record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet. 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. The standard cost card for the company's only product is as follows: Yordy Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The company's balance sheet at the beginning of the year was as follows: The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $220,500 and budgeted activity of 31,500 hours. During the year,the company completed the following transactions: a.Purchased 48,700 kilos of raw material at a price of $9.30 per kilo. b.Used 43,020 kilos of the raw material to produce 30,800 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 28,820 hours at an average cost of $20.20 per hour. d.Applied fixed overhead to the 30,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $208,600.Of this total,$124,600 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $84,000 related to depreciation of manufacturing equipment. e.Transferred 30,800 units from work in process to finished goods. f.Sold for cash 32,200 units to customers at a price of $46.60 per unit. g.Completed and transferred the standard cost associated with the 32,200 units sold from finished goods to cost of goods sold. h.Paid $155,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Enter the beginning balances and record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet. 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. The company calculated the following variances for the year: Yordy Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The company's balance sheet at the beginning of the year was as follows: The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $220,500 and budgeted activity of 31,500 hours. During the year,the company completed the following transactions: a.Purchased 48,700 kilos of raw material at a price of $9.30 per kilo. b.Used 43,020 kilos of the raw material to produce 30,800 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 28,820 hours at an average cost of $20.20 per hour. d.Applied fixed overhead to the 30,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $208,600.Of this total,$124,600 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $84,000 related to depreciation of manufacturing equipment. e.Transferred 30,800 units from work in process to finished goods. f.Sold for cash 32,200 units to customers at a price of $46.60 per unit. g.Completed and transferred the standard cost associated with the 32,200 units sold from finished goods to cost of goods sold. h.Paid $155,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Enter the beginning balances and record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet. 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $220,500 and budgeted activity of 31,500 hours. During the year,the company completed the following transactions: a.Purchased 48,700 kilos of raw material at a price of $9.30 per kilo. b.Used 43,020 kilos of the raw material to produce 30,800 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 28,820 hours at an average cost of $20.20 per hour. d.Applied fixed overhead to the 30,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $208,600.Of this total,$124,600 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $84,000 related to depreciation of manufacturing equipment. e.Transferred 30,800 units from work in process to finished goods. f.Sold for cash 32,200 units to customers at a price of $46.60 per unit. g.Completed and transferred the standard cost associated with the 32,200 units sold from finished goods to cost of goods sold. h.Paid $155,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Enter the beginning balances and record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet. Yordy Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The company's balance sheet at the beginning of the year was as follows: The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $220,500 and budgeted activity of 31,500 hours. During the year,the company completed the following transactions: a.Purchased 48,700 kilos of raw material at a price of $9.30 per kilo. b.Used 43,020 kilos of the raw material to produce 30,800 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 28,820 hours at an average cost of $20.20 per hour. d.Applied fixed overhead to the 30,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $208,600.Of this total,$124,600 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $84,000 related to depreciation of manufacturing equipment. e.Transferred 30,800 units from work in process to finished goods. f.Sold for cash 32,200 units to customers at a price of $46.60 per unit. g.Completed and transferred the standard cost associated with the 32,200 units sold from finished goods to cost of goods sold. h.Paid $155,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Enter the beginning balances and record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet. 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. Yordy Corporation manufactures one product.It does not maintain any beginning or ending Work in Process inventories.The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.There is no variable manufacturing overhead.The company's balance sheet at the beginning of the year was as follows: The standard cost card for the company's only product is as follows: The company calculated the following variances for the year: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $220,500 and budgeted activity of 31,500 hours. During the year,the company completed the following transactions: a.Purchased 48,700 kilos of raw material at a price of $9.30 per kilo. b.Used 43,020 kilos of the raw material to produce 30,800 units of work in process. c.Assigned direct labor costs to work in process.The direct labor workers (who were paid in cash)worked 28,820 hours at an average cost of $20.20 per hour. d.Applied fixed overhead to the 30,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed.Actual fixed overhead costs for the year were $208,600.Of this total,$124,600 related to items such as insurance,utilities,and indirect labor salaries that were all paid in cash and $84,000 related to depreciation of manufacturing equipment. e.Transferred 30,800 units from work in process to finished goods. f.Sold for cash 32,200 units to customers at a price of $46.60 per unit. g.Completed and transferred the standard cost associated with the 32,200 units sold from finished goods to cost of goods sold. h.Paid $155,000 of selling and administrative expenses. i.Closed all standard cost variances to cost of goods sold. Required: 1.Enter the beginning balances and record the above transactions in the worksheet that appears below.Because of the width of the worksheet,it is in two parts.In your text,these two parts would be joined side-by-side to make one very wide worksheet. 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year. 2.Determine the ending balance (e.g.,12/31 balance)in each account. 3.Prepare an income statement for the year.

Correct Answer

verifed

verified

1.& 2.
blured image blured image The explanations for transacti...

View Answer

Bohon Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: Bohon Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 19,700 pounds of raw material at a price of $4.70 per pound. b. Used 18,500 pounds of the raw material to produce 18,400 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the purchase of raw materials is recorded in transaction (a) above,which of the following entries will be made? A) $15,760 in the Materials Quantity Variance column B) ($15,760) in the Materials Price Variance column C) ($15,760) in the Materials Quantity Variance column D) $15,760 in the Materials Price Variance column During the year, the company completed the following transactions concerning direct materials: a. Purchased 19,700 pounds of raw material at a price of $4.70 per pound. b. Used 18,500 pounds of the raw material to produce 18,400 units of work in process. The company calculated the following direct materials variances for the year: Bohon Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 19,700 pounds of raw material at a price of $4.70 per pound. b. Used 18,500 pounds of the raw material to produce 18,400 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the purchase of raw materials is recorded in transaction (a) above,which of the following entries will be made? A) $15,760 in the Materials Quantity Variance column B) ($15,760) in the Materials Price Variance column C) ($15,760) in the Materials Quantity Variance column D) $15,760 in the Materials Price Variance column Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Bohon Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 19,700 pounds of raw material at a price of $4.70 per pound. b. Used 18,500 pounds of the raw material to produce 18,400 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the purchase of raw materials is recorded in transaction (a) above,which of the following entries will be made? A) $15,760 in the Materials Quantity Variance column B) ($15,760) in the Materials Price Variance column C) ($15,760) in the Materials Quantity Variance column D) $15,760 in the Materials Price Variance column Bohon Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 19,700 pounds of raw material at a price of $4.70 per pound. b. Used 18,500 pounds of the raw material to produce 18,400 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the purchase of raw materials is recorded in transaction (a) above,which of the following entries will be made? A) $15,760 in the Materials Quantity Variance column B) ($15,760) in the Materials Price Variance column C) ($15,760) in the Materials Quantity Variance column D) $15,760 in the Materials Price Variance column -When the purchase of raw materials is recorded in transaction (a) above,which of the following entries will be made?


A) $15,760 in the Materials Quantity Variance column
B) ($15,760) in the Materials Price Variance column
C) ($15,760) in the Materials Quantity Variance column
D) $15,760 in the Materials Price Variance column

E) All of the above
F) B) and D)

Correct Answer

verifed

verified

Johanson Corporation uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.The standard cost card for the company's only product is as follows: Johanson Corporation uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.The standard cost card for the company's only product is as follows: During the year,the company purchased 89,600 pounds of raw material at a price of $7.80 per pound and used 79,120 pounds of the raw material to produce 23,300 units of work in process. Assume that all transactions are recorded on a worksheet as shown in the text.On the left-hand side of the equals sign in the worksheet are columns for Cash,Raw Materials,Work in Process,Finished Goods,and PP&E (net) .All of the variance columns are on the right-hand-side of the equals sign along with the column for Retained Earnings. When recording the raw materials purchases,the Raw Materials inventory account will increase (decrease) by: A) $698,880 B) ($716,800) C) ($698,880) D) $716,800 During the year,the company purchased 89,600 pounds of raw material at a price of $7.80 per pound and used 79,120 pounds of the raw material to produce 23,300 units of work in process. Assume that all transactions are recorded on a worksheet as shown in the text.On the left-hand side of the equals sign in the worksheet are columns for Cash,Raw Materials,Work in Process,Finished Goods,and PP&E (net) .All of the variance columns are on the right-hand-side of the equals sign along with the column for Retained Earnings. When recording the raw materials purchases,the Raw Materials inventory account will increase (decrease) by:


A) $698,880
B) ($716,800)
C) ($698,880)
D) $716,800

E) C) and D)
F) B) and D)

Correct Answer

verifed

verified

Rhudy Corporation uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.The direct labor standards for the company's only product specify 0.60 hours per unit at $20.00 per hour.During the year,the company started and completed 20,700 units.Direct labor employees worked 12,120 hours at an average cost of $18.90 per hour. Assume that all transactions are recorded on a worksheet as shown in the text.On the left-hand side of the equals sign in the worksheet are columns for Cash,Raw Materials,Work in Process,Finished Goods,and PP&E (net) .All of the variance columns are on the right-hand-side of the equals sign along with the column for Retained Earnings. When recording the direct labor costs,the Work in Process inventory account will increase (decrease) by:


A) ($229,068)
B) ($248,400)
C) $229,068
D) $248,400

E) None of the above
F) B) and C)

Correct Answer

verifed

verified

Alvino Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Alvino Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $70,000 and budgeted activity of 14,000 hours. During the year, the company completed the following transactions: a. Purchased 32,200 kilos of raw material at a price of $7.80 per kilo. The materials price variance was $22,540 F. b. Used 30,480 kilos of the raw material to produce 27,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 18,260 hours at an average cost of $20.50 per hour. The direct labor rate variance was $9,130 U. The labor efficiency variance was $24,000 F. d. Applied fixed overhead to the 27,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $59,500. Of this total, -$22,500 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $82,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $10,500 F. The fixed manufacturing overhead volume variance was $27,300 F. e. Completed and transferred 27,800 units from work in process to finished goods. f. Sold (for cash) 29,000 units to customers at a price of $31.90 per unit. g. Transferred the standard cost associated with the 29,000 units sold from finished goods to cost of goods sold. h. Paid $101,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, you will need to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -The ending balance in the PP&E (net) account will be closest to: A) $700,300 B) $580,500 C) $677,800 D) $595,800 The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $70,000 and budgeted activity of 14,000 hours. During the year, the company completed the following transactions: a. Purchased 32,200 kilos of raw material at a price of $7.80 per kilo. The materials price variance was $22,540 F. b. Used 30,480 kilos of the raw material to produce 27,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 18,260 hours at an average cost of $20.50 per hour. The direct labor rate variance was $9,130 U. The labor efficiency variance was $24,000 F. d. Applied fixed overhead to the 27,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $59,500. Of this total, -$22,500 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $82,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $10,500 F. The fixed manufacturing overhead volume variance was $27,300 F. e. Completed and transferred 27,800 units from work in process to finished goods. f. Sold (for cash) 29,000 units to customers at a price of $31.90 per unit. g. Transferred the standard cost associated with the 29,000 units sold from finished goods to cost of goods sold. h. Paid $101,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, you will need to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Alvino Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $70,000 and budgeted activity of 14,000 hours. During the year, the company completed the following transactions: a. Purchased 32,200 kilos of raw material at a price of $7.80 per kilo. The materials price variance was $22,540 F. b. Used 30,480 kilos of the raw material to produce 27,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 18,260 hours at an average cost of $20.50 per hour. The direct labor rate variance was $9,130 U. The labor efficiency variance was $24,000 F. d. Applied fixed overhead to the 27,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $59,500. Of this total, -$22,500 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $82,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $10,500 F. The fixed manufacturing overhead volume variance was $27,300 F. e. Completed and transferred 27,800 units from work in process to finished goods. f. Sold (for cash) 29,000 units to customers at a price of $31.90 per unit. g. Transferred the standard cost associated with the 29,000 units sold from finished goods to cost of goods sold. h. Paid $101,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, you will need to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -The ending balance in the PP&E (net) account will be closest to: A) $700,300 B) $580,500 C) $677,800 D) $595,800 Alvino Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $70,000 and budgeted activity of 14,000 hours. During the year, the company completed the following transactions: a. Purchased 32,200 kilos of raw material at a price of $7.80 per kilo. The materials price variance was $22,540 F. b. Used 30,480 kilos of the raw material to produce 27,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 18,260 hours at an average cost of $20.50 per hour. The direct labor rate variance was $9,130 U. The labor efficiency variance was $24,000 F. d. Applied fixed overhead to the 27,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $59,500. Of this total, -$22,500 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $82,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $10,500 F. The fixed manufacturing overhead volume variance was $27,300 F. e. Completed and transferred 27,800 units from work in process to finished goods. f. Sold (for cash) 29,000 units to customers at a price of $31.90 per unit. g. Transferred the standard cost associated with the 29,000 units sold from finished goods to cost of goods sold. h. Paid $101,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, you will need to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -The ending balance in the PP&E (net) account will be closest to: A) $700,300 B) $580,500 C) $677,800 D) $595,800 -The ending balance in the PP&E (net) account will be closest to:


A) $700,300
B) $580,500
C) $677,800
D) $595,800

E) None of the above
F) B) and C)

Correct Answer

verifed

verified

Freiling Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Freiling Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 14,890 hours at an average cost of $22.80 per hour. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the direct labor costs,the Work in Process inventory account will increase (decrease) by: A) $318,780 B) ($339,492) C) $339,492 D) ($318,780) During the year, the company assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 14,890 hours at an average cost of $22.80 per hour. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Freiling Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 14,890 hours at an average cost of $22.80 per hour. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the direct labor costs,the Work in Process inventory account will increase (decrease) by: A) $318,780 B) ($339,492) C) $339,492 D) ($318,780) Freiling Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 14,890 hours at an average cost of $22.80 per hour. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the direct labor costs,the Work in Process inventory account will increase (decrease) by: A) $318,780 B) ($339,492) C) $339,492 D) ($318,780) -When recording the direct labor costs,the Work in Process inventory account will increase (decrease) by:


A) $318,780
B) ($339,492)
C) $339,492
D) ($318,780)

E) C) and D)
F) A) and B)

Correct Answer

verifed

verified

Lakatos Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: Lakatos Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 151,800 kilos of raw material at a price of $9.70 per kilo. b. Used 140,870 kilos of the raw material to produce 38,100 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made? A) ($900) in the Materials Quantity Variance column B) ($900) in the Materials Price Variance column C) $900 in the Materials Price Variance column D) $900 in the Materials Quantity Variance column During the year, the company completed the following transactions concerning direct materials: a. Purchased 151,800 kilos of raw material at a price of $9.70 per kilo. b. Used 140,870 kilos of the raw material to produce 38,100 units of work in process. The company calculated the following direct materials variances for the year: Lakatos Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 151,800 kilos of raw material at a price of $9.70 per kilo. b. Used 140,870 kilos of the raw material to produce 38,100 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made? A) ($900) in the Materials Quantity Variance column B) ($900) in the Materials Price Variance column C) $900 in the Materials Price Variance column D) $900 in the Materials Quantity Variance column Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Lakatos Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 151,800 kilos of raw material at a price of $9.70 per kilo. b. Used 140,870 kilos of the raw material to produce 38,100 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made? A) ($900) in the Materials Quantity Variance column B) ($900) in the Materials Price Variance column C) $900 in the Materials Price Variance column D) $900 in the Materials Quantity Variance column Lakatos Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product contains the following information concerning direct materials: During the year, the company completed the following transactions concerning direct materials: a. Purchased 151,800 kilos of raw material at a price of $9.70 per kilo. b. Used 140,870 kilos of the raw material to produce 38,100 units of work in process. The company calculated the following direct materials variances for the year: Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made? A) ($900) in the Materials Quantity Variance column B) ($900) in the Materials Price Variance column C) $900 in the Materials Price Variance column D) $900 in the Materials Quantity Variance column -When the raw materials used in production are recorded in transaction (b) above,which of the following entries will be made?


A) ($900) in the Materials Quantity Variance column
B) ($900) in the Materials Price Variance column
C) $900 in the Materials Price Variance column
D) $900 in the Materials Quantity Variance column

E) B) and C)
F) All of the above

Correct Answer

verifed

verified

Samples Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Samples Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $140,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 49,500 liters of raw material at a price of $8.00 per liter. The materials price variance was $24,750 F. b. Used 45,820 liters of the raw material to produce 32,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 28,440 hours at an average cost of $17.00 per hour. The direct labor rate variance was $28,440 F. The labor efficiency variance was $39,600 U. d. Applied fixed overhead to the 32,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $154,700. Of this total, $83,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $71,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $14,700 U. The fixed manufacturing overhead volume variance was $43,680 F. e. Completed and transferred 32,800 units from work in process to finished goods. f. Sold (for cash) 32,000 units to customers at a price of $38.20 per unit. g. Transferred the standard cost associated with the 32,000 units sold from finished goods to cost of goods sold. h. Paid $133,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, it would be advisable to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -The adjusted Cost of Goods Sold after closing all of the variances to Cost of Goods Sold will be closest to: A) $977,380 B) $1,020,800 C) $1,265,820 D) $1,064,220 The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $140,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 49,500 liters of raw material at a price of $8.00 per liter. The materials price variance was $24,750 F. b. Used 45,820 liters of the raw material to produce 32,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 28,440 hours at an average cost of $17.00 per hour. The direct labor rate variance was $28,440 F. The labor efficiency variance was $39,600 U. d. Applied fixed overhead to the 32,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $154,700. Of this total, $83,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $71,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $14,700 U. The fixed manufacturing overhead volume variance was $43,680 F. e. Completed and transferred 32,800 units from work in process to finished goods. f. Sold (for cash) 32,000 units to customers at a price of $38.20 per unit. g. Transferred the standard cost associated with the 32,000 units sold from finished goods to cost of goods sold. h. Paid $133,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, it would be advisable to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Samples Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $140,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 49,500 liters of raw material at a price of $8.00 per liter. The materials price variance was $24,750 F. b. Used 45,820 liters of the raw material to produce 32,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 28,440 hours at an average cost of $17.00 per hour. The direct labor rate variance was $28,440 F. The labor efficiency variance was $39,600 U. d. Applied fixed overhead to the 32,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $154,700. Of this total, $83,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $71,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $14,700 U. The fixed manufacturing overhead volume variance was $43,680 F. e. Completed and transferred 32,800 units from work in process to finished goods. f. Sold (for cash) 32,000 units to customers at a price of $38.20 per unit. g. Transferred the standard cost associated with the 32,000 units sold from finished goods to cost of goods sold. h. Paid $133,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, it would be advisable to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -The adjusted Cost of Goods Sold after closing all of the variances to Cost of Goods Sold will be closest to: A) $977,380 B) $1,020,800 C) $1,265,820 D) $1,064,220 Samples Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $140,000 and budgeted activity of 20,000 hours. During the year, the company completed the following transactions: a. Purchased 49,500 liters of raw material at a price of $8.00 per liter. The materials price variance was $24,750 F. b. Used 45,820 liters of the raw material to produce 32,800 units of work in process. The materials quantity variance was $850 F. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 28,440 hours at an average cost of $17.00 per hour. The direct labor rate variance was $28,440 F. The labor efficiency variance was $39,600 U. d. Applied fixed overhead to the 32,800 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $154,700. Of this total, $83,700 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $71,000 related to depreciation of manufacturing equipment. The fixed manufacturing overhead budget variance was $14,700 U. The fixed manufacturing overhead volume variance was $43,680 F. e. Completed and transferred 32,800 units from work in process to finished goods. f. Sold (for cash) 32,000 units to customers at a price of $38.20 per unit. g. Transferred the standard cost associated with the 32,000 units sold from finished goods to cost of goods sold. h. Paid $133,000 of selling and administrative expenses. i. Closed all standard cost variances to cost of goods sold. To answer the following questions, it would be advisable to record transactions a through i in the worksheet below. This worksheet is similar to the worksheets in your text except that it has been split into two parts to fit on the page. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -The adjusted Cost of Goods Sold after closing all of the variances to Cost of Goods Sold will be closest to: A) $977,380 B) $1,020,800 C) $1,265,820 D) $1,064,220 -The adjusted Cost of Goods Sold after closing all of the variances to Cost of Goods Sold will be closest to:


A) $977,380
B) $1,020,800
C) $1,265,820
D) $1,064,220

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

Scogin Corporation uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.The standard cost card for the company's only product is as follows: Scogin Corporation uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold.The standard cost card for the company's only product is as follows: During the year,the company purchased 76,500 pounds of raw material at a price of $8.70 per pound and used 71,880 pounds of the raw material to produce 19,400 units of work in process. Assume that all transactions are recorded on a worksheet as shown in the text.On the left-hand side of the equals sign in the worksheet are columns for Cash,Raw Materials,Work in Process,Finished Goods,and PP&E (net) .All of the variance columns are on the right-hand-side of the equals sign along with the column for Retained Earnings. When recording the raw materials used in production,the Work in Process inventory account will increase (decrease) by: A) ($646,020) B) $646,020 C) ($646,920) D) $646,920 During the year,the company purchased 76,500 pounds of raw material at a price of $8.70 per pound and used 71,880 pounds of the raw material to produce 19,400 units of work in process. Assume that all transactions are recorded on a worksheet as shown in the text.On the left-hand side of the equals sign in the worksheet are columns for Cash,Raw Materials,Work in Process,Finished Goods,and PP&E (net) .All of the variance columns are on the right-hand-side of the equals sign along with the column for Retained Earnings. When recording the raw materials used in production,the Work in Process inventory account will increase (decrease) by:


A) ($646,020)
B) $646,020
C) ($646,920)
D) $646,920

E) A) and D)
F) A) and B)

Correct Answer

verifed

verified

Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) ($436,390) B) ($472,328) C) $472,328 D) $436,390 The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) ($436,390) B) ($472,328) C) $472,328 D) $436,390 Phann Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs and any variances are closed directly to Cost of Goods Sold. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: The standard fixed manufacturing overhead rate was based on budgeted fixed manufacturing overhead of $90,000 and budgeted activity of 7,500 hours. During the year, the company completed the following transactions: a. Purchased 59,000 kilos of raw material at a price of $9.20 per kilo. b. Used 51,340 kilos of the raw material to produce 18,300 units of work in process. c. Assigned direct labor costs to work in process. The direct labor workers (who were paid in cash) worked 8,850 hours at an average cost of $23.70 per hour. d. Applied fixed overhead to the 18,300 units in work in process inventory using the predetermined overhead rate multiplied by the number of direct labor-hours allowed. Actual fixed overhead costs for the year were $79,400. Of this total, $22,400 related to items such as insurance, utilities, and indirect labor salaries that were all paid in cash and $57,000 related to depreciation of manufacturing equipment. e. Completed and transferred 18,300 units from work in process to finished goods. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) ($436,390) B) ($472,328) C) $472,328 D) $436,390 -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by:


A) ($436,390)
B) ($472,328)
C) $472,328
D) $436,390

E) C) and D)
F) A) and B)

Correct Answer

verifed

verified

Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) $609,440 B) $637,568 C) ($637,568) D) ($609,440) During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) $609,440 B) $637,568 C) ($637,568) D) ($609,440) Robnett Corporation manufactures one product. It does not maintain any beginning or ending Work in Process inventories. The company uses a standard cost system in which inventories are recorded at their standard costs. There is no variable manufacturing overhead. The standard cost card for the company's only product is as follows: During the year, the company completed the following transactions: a. Purchased 106,900 liters of raw material at a price of $6.80 per liter. b. Used 93,760 liters of the raw material to produce 24,700 units of work in process. Assume that all transactions are recorded on the below worksheet, which is similar to the worksheet shown in your text except that it has been divided into two parts so that it fits on one page. The beginning balances in each of the accounts have been given. PP&E (net) stands for Property, Plant, and Equipment net of depreciation. -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by: A) $609,440 B) $637,568 C) ($637,568) D) ($609,440) -When recording the raw materials used in production in transaction (b) above,the Raw Materials inventory account will increase (decrease) by:


A) $609,440
B) $637,568
C) ($637,568)
D) ($609,440)

E) A) and D)
F) All of the above

Correct Answer

verifed

verified

Showing 101 - 120 of 138

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 2

Job-Order Costing: Calculating Unit Production Costs

292 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

255 Questions

Exam 4

Process Costing

138 Questions

Exam 5

Cost-Volume-Profit Relationships

260 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 7

Super-Variable Costing

49 Questions

Exam 8

Master Budgeting

234 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Differential Analysis: The Key to Decision Making

203 Questions

Exam 13

Capital Budgeting Decisions

179 Questions

Exam 14

Statement of Cash Flows

132 Questions

Exam 15

Financial Statement Analysis

289 Questions

Exam 16

Cost of Quality

66 Questions

Exam 17

Activity-Based Absorption Costing

20 Questions

Exam 18

The Predetermined Overhead Rate and Capacity

42 Questions

Exam 19

Job-Order Costing: a Microsoft Excel-Based Approach

28 Questions

Exam 20

Fifo Method

100 Questions

Exam 21

Service Department Allocations

60 Questions

Exam 22

Analyzing Mixed Costs

81 Questions

Exam 23

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 24

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 26

Transfer Pricing

102 Questions

Exam 27

Service Department Charges

44 Questions

Exam 28

Pricing Decisions

149 Questions

Exam 29

The Concept of Present Value

16 Questions

Exam 30

Income Taxes and the Present Value Method

150 Questions

Exam 31

the Direct Method of Determining the Net Cash Provided by Operating Activities

56 Questions

Show Answer