Filters
Question type
Study Flashcards

Barbeau Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Barbeau Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A492. The following data were recorded for this job: -The estimated total manufacturing overhead for the Customizing Department is closest to: A) $63,500 B) $21,500 C) $42,000 D) $33,853 During the current month the company started and finished Job A492. The following data were recorded for this job: Barbeau Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A492. The following data were recorded for this job: -The estimated total manufacturing overhead for the Customizing Department is closest to: A) $63,500 B) $21,500 C) $42,000 D) $33,853 -The estimated total manufacturing overhead for the Customizing Department is closest to:


A) $63,500
B) $21,500
C) $42,000
D) $33,853

E) A) and D)
F) None of the above

Correct Answer

verifed

verified

Tiff Corporation has two production departments, Casting and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Tiff Corporation has two production departments, Casting and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job P131. The following data were recorded for this job: -The predetermined overhead rate for the Casting Department is closest to: A) $9.40 per machine-hour B) $7.60 per machine-hour C) $1.80 per machine-hour D) $31.96 per machine-hour During the current month the company started and finished Job P131. The following data were recorded for this job: Tiff Corporation has two production departments, Casting and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job P131. The following data were recorded for this job: -The predetermined overhead rate for the Casting Department is closest to: A) $9.40 per machine-hour B) $7.60 per machine-hour C) $1.80 per machine-hour D) $31.96 per machine-hour -The predetermined overhead rate for the Casting Department is closest to:


A) $9.40 per machine-hour
B) $7.60 per machine-hour
C) $1.80 per machine-hour
D) $31.96 per machine-hour

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Columbo Corporation has two production departments,Forming and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Columbo Corporation has two production departments,Forming and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job A948.The following data were recorded for this job: If the company marks up its manufacturing costs by 40% then the selling price for Job A948 would be closest to: A) $6,197.80 B) $1,770.80 C) $4,427.00 D) $6,818.00 During the current month the company started and finished Job A948.The following data were recorded for this job: Columbo Corporation has two production departments,Forming and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job A948.The following data were recorded for this job: If the company marks up its manufacturing costs by 40% then the selling price for Job A948 would be closest to: A) $6,197.80 B) $1,770.80 C) $4,427.00 D) $6,818.00 If the company marks up its manufacturing costs by 40% then the selling price for Job A948 would be closest to:


A) $6,197.80
B) $1,770.80
C) $4,427.00
D) $6,818.00

E) All of the above
F) B) and C)

Correct Answer

verifed

verified

Teasley Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on 70,000 machine-hours,total fixed manufacturing overhead cost of $630,000,and a variable manufacturing overhead rate of $3.40 per machine-hour.Job X159 was recently completed.The job cost sheet for the job contained the following data: Teasley Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on 70,000 machine-hours,total fixed manufacturing overhead cost of $630,000,and a variable manufacturing overhead rate of $3.40 per machine-hour.Job X159 was recently completed.The job cost sheet for the job contained the following data: Required: Calculate the total job cost for Job X159. Required: Calculate the total job cost for Job X159.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: -The predetermined overhead rate is closest to: A) $12.60 per machine-hour B) $10.50 per machine-hour C) $8.40 per machine-hour D) $2.10 per machine-hour Recently, Job T687 was completed with the following characteristics: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: -The predetermined overhead rate is closest to: A) $12.60 per machine-hour B) $10.50 per machine-hour C) $8.40 per machine-hour D) $2.10 per machine-hour -The predetermined overhead rate is closest to:


A) $12.60 per machine-hour
B) $10.50 per machine-hour
C) $8.40 per machine-hour
D) $2.10 per machine-hour

E) C) and D)
F) A) and C)

Correct Answer

verifed

verified

-Job 910 was recently completed.The following data have been recorded on its job cost sheet: The Corporation applies manufacturing overhead on the basis of machine-hours.The predetermined overhead rate is $15 per machine-hour.The total cost that would be recorded on the job cost sheet for Job 910 would be: A) $3,220 B) $3,760 C) $5,935 D) $3,445 -Job 910 was recently completed.The following data have been recorded on its job cost sheet: -Job 910 was recently completed.The following data have been recorded on its job cost sheet: The Corporation applies manufacturing overhead on the basis of machine-hours.The predetermined overhead rate is $15 per machine-hour.The total cost that would be recorded on the job cost sheet for Job 910 would be: A) $3,220 B) $3,760 C) $5,935 D) $3,445 The Corporation applies manufacturing overhead on the basis of machine-hours.The predetermined overhead rate is $15 per machine-hour.The total cost that would be recorded on the job cost sheet for Job 910 would be:


A) $3,220
B) $3,760
C) $5,935
D) $3,445

E) B) and D)
F) All of the above

Correct Answer

verifed

verified

C

Levi Corporation uses a predetermined overhead rate of $23.40 per direct labor-hour.This predetermined overhead rate was based on estimated total fixed manufacturing overhead of $702,000 and 30,000 direct labor-hours for the period.The company incurred actual total fixed manufacturing overhead of $738,000 and 27,100 total direct labor-hours during the period. Required: Determine the amount of manufacturing overhead that would have been applied to all jobs during the period.

Correct Answer

verifed

verified

Dietzen Corporation has two manufacturing departments--Casting and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Dietzen Corporation has two manufacturing departments--Casting and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job D and Job J.There were no beginning inventories.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job D. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job J. During the most recent month,the company started and completed two jobs--Job D and Job J.There were no beginning inventories.Data concerning those two jobs follow: Dietzen Corporation has two manufacturing departments--Casting and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job D and Job J.There were no beginning inventories.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job D. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job J. Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job D. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job J.

Correct Answer

verifed

verified

a.The first step is to calculate the est...

View Answer

Levron Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $58,000, variable manufacturing overhead of $2.00 per machine-hour, and 20,000 machine-hours. The company has provided the following data concerning Job P978 which was recently completed: Levron Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $58,000, variable manufacturing overhead of $2.00 per machine-hour, and 20,000 machine-hours. The company has provided the following data concerning Job P978 which was recently completed: -The amount of overhead applied to Job P978 is closest to: A) $232 B) $160 C) $392 D) $552 -The amount of overhead applied to Job P978 is closest to:


A) $232
B) $160
C) $392
D) $552

E) A) and D)
F) C) and D)

Correct Answer

verifed

verified

Brothern Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year.Data for the most recently completed year appear below: Brothern Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year.Data for the most recently completed year appear below: The predetermined overhead rate for the recently completed year was closest to: A) $25.37 per machine-hour B) $27.13 per machine-hour C) $6.76 per machine-hour D) $20.37 per machine-hour The predetermined overhead rate for the recently completed year was closest to:


A) $25.37 per machine-hour
B) $27.13 per machine-hour
C) $6.76 per machine-hour
D) $20.37 per machine-hour

E) All of the above
F) None of the above

Correct Answer

verifed

verified

Beans Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $162,000, variable manufacturing overhead of $2.80 per direct labor-hour, and 60,000 direct labor-hours. Recently, Job K818 was completed with the following characteristics: Beans Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $162,000, variable manufacturing overhead of $2.80 per direct labor-hour, and 60,000 direct labor-hours. Recently, Job K818 was completed with the following characteristics: -The unit product cost for Job K818 is closest to: A) $51.90 B) $259.50 C) $232.00 D) $119.50 -The unit product cost for Job K818 is closest to:


A) $51.90
B) $259.50
C) $232.00
D) $119.50

E) A) and D)
F) A) and C)

Correct Answer

verifed

verified

B

Bolander Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Bolander Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job M825 was completed with the following characteristics: -The total job cost for Job M825 is closest to: A) $2,360 B) $2,505 C) $1,185 D) $3,025 Recently, Job M825 was completed with the following characteristics: Bolander Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job M825 was completed with the following characteristics: -The total job cost for Job M825 is closest to: A) $2,360 B) $2,505 C) $1,185 D) $3,025 -The total job cost for Job M825 is closest to:


A) $2,360
B) $2,505
C) $1,185
D) $3,025

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

D

Kreuzer Corporation is using a predetermined overhead rate of $22.30 per machine-hour that was based on estimated total fixed manufacturing overhead of $446,000 and 20,000 machine-hours for the period.The company incurred actual total fixed manufacturing overhead of $409,000 and 18,200 total machine-hours during the period.The amount of manufacturing overhead that would have been applied to all jobs during the period is closest to:


A) $446,000
B) $37,000
C) $372,190
D) $405,860

E) C) and D)
F) B) and C)

Correct Answer

verifed

verified

A cost driver is a factor,such as machine-hours,beds occupied,computer time,or flight-hours,that causes direct costs.

A) True
B) False

Correct Answer

verifed

verified

Mccaughan Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year.Data for the most recently completed year appear below: Mccaughan Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year.Data for the most recently completed year appear below: Required: Compute the company's predetermined overhead rate for the recently completed year. Required: Compute the company's predetermined overhead rate for the recently completed year.

Correct Answer

verifed

verified

Estimated total manufacturing ...

View Answer

Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Forming Department is closest to: A) $5.60 B) $7.40 C) $1.80 D) $6.05 During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Forming Department is closest to: A) $5.60 B) $7.40 C) $1.80 D) $6.05 -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Forming Department is closest to:


A) $5.60
B) $7.40
C) $1.80
D) $6.05

E) B) and D)
F) A) and C)

Correct Answer

verifed

verified

Alsobrooks Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Alsobrooks Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Recently Job M242 was completed with the following characteristics: Required: a.Calculate the total job cost for Job M242. b.Calculate the unit product cost for Job M242. Recently Job M242 was completed with the following characteristics: Alsobrooks Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Recently Job M242 was completed with the following characteristics: Required: a.Calculate the total job cost for Job M242. b.Calculate the unit product cost for Job M242. Required: a.Calculate the total job cost for Job M242. b.Calculate the unit product cost for Job M242.

Correct Answer

verifed

verified

a.Estimated total manufacturing overhead...

View Answer

Dehner Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Dehner Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P951 was completed with the following characteristics: -The unit product cost for Job P951 is closest to: A) $237.75 B) $264.75 C) $64.75 D) $52.95 Recently, Job P951 was completed with the following characteristics: Dehner Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P951 was completed with the following characteristics: -The unit product cost for Job P951 is closest to: A) $237.75 B) $264.75 C) $64.75 D) $52.95 -The unit product cost for Job P951 is closest to:


A) $237.75
B) $264.75
C) $64.75
D) $52.95

E) B) and C)
F) B) and D)

Correct Answer

verifed

verified

Dejarnette Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Dejarnette Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: -The estimated total manufacturing overhead is closest to: A) $416,003 B) $248,000 C) $664,000 D) $416,000 -The estimated total manufacturing overhead is closest to:


A) $416,003
B) $248,000
C) $664,000
D) $416,000

E) A) and C)
F) B) and C)

Correct Answer

verifed

verified

Petty Corporation has two production departments, Milling and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Petty Corporation has two production departments, Milling and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: -The estimated total manufacturing overhead for the Milling Department is closest to: A) $408,000 B) $38,000 C) $148,000 D) $186,000 -The estimated total manufacturing overhead for the Milling Department is closest to:


A) $408,000
B) $38,000
C) $148,000
D) $186,000

E) A) and B)
F) B) and D)

Correct Answer

verifed

verified

Showing 1 - 20 of 292

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

255 Questions

Exam 4

Process Costing

138 Questions

Exam 5

Cost-Volume-Profit Relationships

260 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 7

Super-Variable Costing

49 Questions

Exam 8

Master Budgeting

234 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Differential Analysis: The Key to Decision Making

203 Questions

Exam 13

Capital Budgeting Decisions

179 Questions

Exam 14

Statement of Cash Flows

132 Questions

Exam 15

Financial Statement Analysis

289 Questions

Exam 16

Cost of Quality

66 Questions

Exam 17

Activity-Based Absorption Costing

20 Questions

Exam 18

The Predetermined Overhead Rate and Capacity

42 Questions

Exam 19

Job-Order Costing: a Microsoft Excel-Based Approach

28 Questions

Exam 20

Fifo Method

100 Questions

Exam 21

Service Department Allocations

60 Questions

Exam 22

Analyzing Mixed Costs

81 Questions

Exam 23

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 24

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 25

Standard Cost Systems: a Financial Reporting Perspective Using Microsoft Excel

138 Questions

Exam 26

Transfer Pricing

102 Questions

Exam 27

Service Department Charges

44 Questions

Exam 28

Pricing Decisions

149 Questions

Exam 29

The Concept of Present Value

16 Questions

Exam 30

Income Taxes and the Present Value Method

150 Questions

Exam 31

the Direct Method of Determining the Net Cash Provided by Operating Activities

56 Questions

Show Answer