Filters
Question type
Study Flashcards

In a job-order cost system,indirect labor is assigned to a job using information from the employee time ticket.

A) True
B) False

Correct Answer

verifed

verified

Tomey Corporation has two production departments,Forming and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Tomey Corporation has two production departments,Forming and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job T617.The following data were recorded for this job: The total job cost for Job T617 is closest to: A) $5,604 B) $2,584 C) $684 D) $3,020 During the current month the company started and finished Job T617.The following data were recorded for this job: Tomey Corporation has two production departments,Forming and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job T617.The following data were recorded for this job: The total job cost for Job T617 is closest to: A) $5,604 B) $2,584 C) $684 D) $3,020 The total job cost for Job T617 is closest to:


A) $5,604
B) $2,584
C) $684
D) $3,020

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T629 was completed with the following characteristics: -The predetermined overhead rate is closest to: A) $8.10 per machine-hour B) $2.10 per machine-hour C) $3.90 per machine-hour D) $6.00 per machine-hour Recently, Job T629 was completed with the following characteristics: Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T629 was completed with the following characteristics: -The predetermined overhead rate is closest to: A) $8.10 per machine-hour B) $2.10 per machine-hour C) $3.90 per machine-hour D) $6.00 per machine-hour -The predetermined overhead rate is closest to:


A) $8.10 per machine-hour
B) $2.10 per machine-hour
C) $3.90 per machine-hour
D) $6.00 per machine-hour

E) B) and C)
F) None of the above

Correct Answer

verifed

verified

Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: -The total job cost for Job A477 is closest to: A) $3,450 B) $1,170 C) $3,970 D) $3,320 -The total job cost for Job A477 is closest to:


A) $3,450
B) $1,170
C) $3,970
D) $3,320

E) All of the above
F) A) and D)

Correct Answer

verifed

verified

Halbur Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Halbur Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job C is closest to: A) $18,500 B) $67,192 C) $11,300 D) $37,392 During the most recent month, the company started and completed two jobs--Job C and Job J. There were no beginning inventories. Data concerning those two jobs follow: Halbur Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job C is closest to: A) $18,500 B) $67,192 C) $11,300 D) $37,392 -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job C is closest to:


A) $18,500
B) $67,192
C) $11,300
D) $37,392

E) None of the above
F) All of the above

Correct Answer

verifed

verified

Levron Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $58,000, variable manufacturing overhead of $2.00 per machine-hour, and 20,000 machine-hours. The company has provided the following data concerning Job P978 which was recently completed: Levron Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $58,000, variable manufacturing overhead of $2.00 per machine-hour, and 20,000 machine-hours. The company has provided the following data concerning Job P978 which was recently completed: -If the company marks up its unit product costs by 30% then the selling price for a unit in Job P978 is closest to: A) $249.58 B) $229.58 C) $204.10 D) $52.98 -If the company marks up its unit product costs by 30% then the selling price for a unit in Job P978 is closest to:


A) $249.58
B) $229.58
C) $204.10
D) $52.98

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

Beans Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $162,000, variable manufacturing overhead of $2.80 per direct labor-hour, and 60,000 direct labor-hours. Recently, Job K818 was completed with the following characteristics: Beans Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $162,000, variable manufacturing overhead of $2.80 per direct labor-hour, and 60,000 direct labor-hours. Recently, Job K818 was completed with the following characteristics: -The amount of overhead applied to Job K818 is closest to: A) $135 B) $140 C) $415 D) $275 -The amount of overhead applied to Job K818 is closest to:


A) $135
B) $140
C) $415
D) $275

E) A) and C)
F) All of the above

Correct Answer

verifed

verified

Gercak Corporation has two production departments,Forming and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Gercak Corporation has two production departments,Forming and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job X560.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Assembly Department. b.Calculate the predetermined overhead rate for the Forming Department. c.Calculate the total amount of overhead applied to Job X560 in both departments. During the current month the company started and finished Job X560.The following data were recorded for this job: Gercak Corporation has two production departments,Forming and Assembly.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job X560.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Assembly Department. b.Calculate the predetermined overhead rate for the Forming Department. c.Calculate the total amount of overhead applied to Job X560 in both departments. Required: a.Calculate the estimated total manufacturing overhead for the Assembly Department. b.Calculate the predetermined overhead rate for the Forming Department. c.Calculate the total amount of overhead applied to Job X560 in both departments.

Correct Answer

verifed

verified

a.Assembly Department overhead cost = Fi...

View Answer

Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T272. The following data were recorded for this job: -The predetermined overhead rate for the Machining Department is closest to: A) $22.93 per machine-hour B) $6.50 per machine-hour C) $2.10 per machine-hour D) $8.60 per machine-hour During the current month the company started and finished Job T272. The following data were recorded for this job: Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T272. The following data were recorded for this job: -The predetermined overhead rate for the Machining Department is closest to: A) $22.93 per machine-hour B) $6.50 per machine-hour C) $2.10 per machine-hour D) $8.60 per machine-hour -The predetermined overhead rate for the Machining Department is closest to:


A) $22.93 per machine-hour
B) $6.50 per machine-hour
C) $2.10 per machine-hour
D) $8.60 per machine-hour

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Which of the following statements is not correct concerning multiple overhead rate systems?


A) A multiple overhead rate system is more complex than a system based on a single plantwide overhead rate.
B) A multiple overhead rate system is usually more accurate than a system based on a single plantwide overhead rate.
C) A company may choose to create a separate overhead rate for each of its production departments.
D) In departments that are relatively labor-intensive, their overhead costs should be applied to jobs based on machine-hours rather than on direct labor-hours.

E) C) and D)
F) None of the above

Correct Answer

verifed

verified

Lueckenhoff Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $497,000, variable manufacturing overhead of $2.40 per direct labor-hour, and 70,000 direct labor-hours. The company has provided the following data concerning Job T498 which was recently completed: Lueckenhoff Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $497,000, variable manufacturing overhead of $2.40 per direct labor-hour, and 70,000 direct labor-hours. The company has provided the following data concerning Job T498 which was recently completed: -The estimated total manufacturing overhead is closest to: A) $665,000 B) $497,002 C) $497,000 D) $168,000 -The estimated total manufacturing overhead is closest to:


A) $665,000
B) $497,002
C) $497,000
D) $168,000

E) None of the above
F) B) and C)

Correct Answer

verifed

verified

Bierce Corporation has two manufacturing departments--Machining and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Bierce Corporation has two manufacturing departments--Machining and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job B and Job K.There were no beginning inventories.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate that overhead rate. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job B. c.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job K. d.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.What is the departmental predetermined overhead rate in the Machining department? e.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.What is the departmental predetermined overhead rate in the Finishing department? f.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job B? g.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job K? During the most recent month,the company started and completed two jobs--Job B and Job K.There were no beginning inventories.Data concerning those two jobs follow: Bierce Corporation has two manufacturing departments--Machining and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job B and Job K.There were no beginning inventories.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate that overhead rate. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job B. c.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job K. d.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.What is the departmental predetermined overhead rate in the Machining department? e.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.What is the departmental predetermined overhead rate in the Finishing department? f.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job B? g.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job K? Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate that overhead rate. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job B. c.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job K. d.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.What is the departmental predetermined overhead rate in the Machining department? e.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.What is the departmental predetermined overhead rate in the Finishing department? f.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job B? g.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job K?

Correct Answer

verifed

verified

a.The first step is to calculate the est...

View Answer

Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The amount of overhead applied to Job P513 is closest to: A) $76 B) $190 C) $266 D) $114 Customizing Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The amount of overhead applied to Job P513 is closest to: A) $76 B) $190 C) $266 D) $114 The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The amount of overhead applied to Job P513 is closest to: A) $76 B) $190 C) $266 D) $114 The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The amount of overhead applied to Job P513 is closest to: A) $76 B) $190 C) $266 D) $114 Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The amount of overhead applied to Job P513 is closest to: A) $76 B) $190 C) $266 D) $114 Recently, Job P513 was completed with the following characteristics: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The amount of overhead applied to Job P513 is closest to: A) $76 B) $190 C) $266 D) $114 -The amount of overhead applied to Job P513 is closest to:


A) $76
B) $190
C) $266
D) $114

E) A) and D)
F) A) and C)

Correct Answer

verifed

verified

Fillmore Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on 60,000 direct labor-hours,total fixed manufacturing overhead cost of $96,000,and a variable manufacturing overhead rate of $3.30 per direct labor-hour.Recently Job X809 was completed and required 100 direct labor-hours. Required: a.Calculate the estimated total manufacturing overhead for the year. b.Calculate the predetermined overhead rate for the year. c.Calculate the amount of overhead applied to Job X809.

Correct Answer

verifed

verified

a.Estimated total manufacturing overhead...

View Answer

Nielsen Corporation has two manufacturing departments--Machining and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Nielsen Corporation has two manufacturing departments--Machining and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job F and Job M. There were no beginning inventories. Data concerning those two jobs follow: -The amount of overhead applied to Job K332 is closest to: A) $812 B) $350 C) $462 D) $1,162 During the most recent month, the company started and completed two jobs--Job F and Job M. There were no beginning inventories. Data concerning those two jobs follow: Nielsen Corporation has two manufacturing departments--Machining and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job F and Job M. There were no beginning inventories. Data concerning those two jobs follow: -The amount of overhead applied to Job K332 is closest to: A) $812 B) $350 C) $462 D) $1,162 -The amount of overhead applied to Job K332 is closest to:


A) $812
B) $350
C) $462
D) $1,162

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

-Grib Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs.The predetermined overhead rates for the year are 200% of direct labor cost for Department A and 50% of direct labor cost for Department B.Job 436,started and completed during the year,was charged with the following costs: The total manufacturing cost assigned to Job 436 was: A) $360,000 B) $390,000 C) $270,000 D) $480,000 -Grib Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs.The predetermined overhead rates for the year are 200% of direct labor cost for Department A and 50% of direct labor cost for Department B.Job 436,started and completed during the year,was charged with the following costs: -Grib Corporation uses a predetermined overhead rate based on direct labor cost to apply manufacturing overhead to jobs.The predetermined overhead rates for the year are 200% of direct labor cost for Department A and 50% of direct labor cost for Department B.Job 436,started and completed during the year,was charged with the following costs: The total manufacturing cost assigned to Job 436 was: A) $360,000 B) $390,000 C) $270,000 D) $480,000 The total manufacturing cost assigned to Job 436 was:


A) $360,000
B) $390,000
C) $270,000
D) $480,000

E) B) and C)
F) A) and C)

Correct Answer

verifed

verified

Sivret Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Sivret Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job M598 was completed with the following characteristics: -If the company marks up its unit product costs by 40% then the selling price for a unit in Job M598 is closest to: A) $321.35 B) $225.05 C) $86.10 D) $301.35 Recently, Job M598 was completed with the following characteristics: Sivret Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job M598 was completed with the following characteristics: -If the company marks up its unit product costs by 40% then the selling price for a unit in Job M598 is closest to: A) $321.35 B) $225.05 C) $86.10 D) $301.35 -If the company marks up its unit product costs by 40% then the selling price for a unit in Job M598 is closest to:


A) $321.35
B) $225.05
C) $86.10
D) $301.35

E) A) and D)
F) A) and B)

Correct Answer

verifed

verified

Kroeker Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Kroeker Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T898. The following data were recorded for this job: -The amount of overhead applied in the Customizing Department to Job T898 is closest to: A) $450.00 B) $119,700.00 C) $665.00 D) $215.00 During the current month the company started and finished Job T898. The following data were recorded for this job: Kroeker Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T898. The following data were recorded for this job: -The amount of overhead applied in the Customizing Department to Job T898 is closest to: A) $450.00 B) $119,700.00 C) $665.00 D) $215.00 -The amount of overhead applied in the Customizing Department to Job T898 is closest to:


A) $450.00
B) $119,700.00
C) $665.00
D) $215.00

E) C) and D)
F) None of the above

Correct Answer

verifed

verified

Ashe Corporation has two manufacturing departments--Machining and Customizing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Ashe Corporation has two manufacturing departments--Machining and Customizing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job B and Job K.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job K is closest to: A) $11,760 B) $1,740 C) $13,716 D) $13,500 During the most recent month,the company started and completed two jobs--Job B and Job K.There were no beginning inventories.Data concerning those two jobs follow: Ashe Corporation has two manufacturing departments--Machining and Customizing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job B and Job K.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job K is closest to: A) $11,760 B) $1,740 C) $13,716 D) $13,500 Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job K is closest to:


A) $11,760
B) $1,740
C) $13,716
D) $13,500

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Harnett Corporation has two manufacturing departments--Molding and Assembly.The company used the following data at the beginning of the period to calculate predetermined overhead rates: Harnett Corporation has two manufacturing departments--Molding and Assembly.The company used the following data at the beginning of the period to calculate predetermined overhead rates: During the period,the company started and completed two jobs--Job E and Job M.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate that overhead rate. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job E. c.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job E. d.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 60% on manufacturing cost to establish selling prices.Calculate the selling price for Job E. e.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.What is the departmental predetermined overhead rate in the Molding department? f.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.What is the departmental predetermined overhead rate in the Assembly department? g.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job E? h.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 60% on manufacturing cost to establish selling prices.Calculate the selling price for Job E. During the period,the company started and completed two jobs--Job E and Job M.Data concerning those two jobs follow: Harnett Corporation has two manufacturing departments--Molding and Assembly.The company used the following data at the beginning of the period to calculate predetermined overhead rates: During the period,the company started and completed two jobs--Job E and Job M.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate that overhead rate. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job E. c.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job E. d.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 60% on manufacturing cost to establish selling prices.Calculate the selling price for Job E. e.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.What is the departmental predetermined overhead rate in the Molding department? f.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.What is the departmental predetermined overhead rate in the Assembly department? g.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job E? h.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 60% on manufacturing cost to establish selling prices.Calculate the selling price for Job E. Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate that overhead rate. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job E. c.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the total manufacturing cost assigned to Job E. d.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 60% on manufacturing cost to establish selling prices.Calculate the selling price for Job E. e.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.What is the departmental predetermined overhead rate in the Molding department? f.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.What is the departmental predetermined overhead rate in the Assembly department? g.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job E? h.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 60% on manufacturing cost to establish selling prices.Calculate the selling price for Job E.

Correct Answer

verifed

verified

a.The first step is to calculate the est...

View Answer

Showing 101 - 120 of 292

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

255 Questions

Exam 4

Process Costing

138 Questions

Exam 5

Cost-Volume-Profit Relationships

260 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 7

Super-Variable Costing

49 Questions

Exam 8

Master Budgeting

234 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Differential Analysis: The Key to Decision Making

203 Questions

Exam 13

Capital Budgeting Decisions

179 Questions

Exam 14

Statement of Cash Flows

132 Questions

Exam 15

Financial Statement Analysis

289 Questions

Exam 16

Cost of Quality

66 Questions

Exam 17

Activity-Based Absorption Costing

20 Questions

Exam 18

The Predetermined Overhead Rate and Capacity

42 Questions

Exam 19

Job-Order Costing: a Microsoft Excel-Based Approach

28 Questions

Exam 20

Fifo Method

100 Questions

Exam 21

Service Department Allocations

60 Questions

Exam 22

Analyzing Mixed Costs

81 Questions

Exam 23

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 24

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 25

Standard Cost Systems: a Financial Reporting Perspective Using Microsoft Excel

138 Questions

Exam 26

Transfer Pricing

102 Questions

Exam 27

Service Department Charges

44 Questions

Exam 28

Pricing Decisions

149 Questions

Exam 29

The Concept of Present Value

16 Questions

Exam 30

Income Taxes and the Present Value Method

150 Questions

Exam 31

the Direct Method of Determining the Net Cash Provided by Operating Activities

56 Questions

Show Answer