Filters
Question type
Study Flashcards

Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: -The predetermined overhead rate for the Assembly Department is closest to: A) $3.00 per direct labor-hour B) $12.70 per direct labor-hour C) $9.70 per direct labor-hour D) $5.35 per direct labor-hour -The predetermined overhead rate for the Assembly Department is closest to:


A) $3.00 per direct labor-hour
B) $12.70 per direct labor-hour
C) $9.70 per direct labor-hour
D) $5.35 per direct labor-hour

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Obermeyer Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on 10,000 direct labor-hours,total fixed manufacturing overhead cost of $96,000,and a variable manufacturing overhead rate of $3.60 per direct labor-hour.Job A735,which was for 40 units of a custom product,was recently completed.The job cost sheet for the job contained the following data: Obermeyer Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on 10,000 direct labor-hours,total fixed manufacturing overhead cost of $96,000,and a variable manufacturing overhead rate of $3.60 per direct labor-hour.Job A735,which was for 40 units of a custom product,was recently completed.The job cost sheet for the job contained the following data: Required: a.Calculate the amount of overhead applied to Job A735. b.Calculate the total job cost for Job A735. c.Calculate the unit product cost for Job A735. Required: a.Calculate the amount of overhead applied to Job A735. b.Calculate the total job cost for Job A735. c.Calculate the unit product cost for Job A735.

Correct Answer

verifed

verified

a.Estimated total manufacturing overhead...

View Answer

Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: -The amount of overhead applied to Job T687 is closest to: A) $315 B) $252 C) $378 D) $63 Recently, Job T687 was completed with the following characteristics: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: -The amount of overhead applied to Job T687 is closest to: A) $315 B) $252 C) $378 D) $63 -The amount of overhead applied to Job T687 is closest to:


A) $315
B) $252
C) $378
D) $63

E) C) and D)
F) B) and D)

Correct Answer

verifed

verified

Camm Corporation has two manufacturing departments--Forming and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Camm Corporation has two manufacturing departments--Forming and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Assembly Department is closest to: A) $2.50 B) $2.30 C) $4.80 D) $5.46 Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Assembly Department is closest to:


A) $2.50
B) $2.30
C) $4.80
D) $5.46

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

In a job-order costing system that is based on machine-hours,which of the following formulas is correct?


A) Predetermined overhead rate = Actual manufacturing overhead ÷ Actual machine-hours
B) Predetermined overhead rate = Actual manufacturing overhead ÷ Estimated machine-hours
C) Predetermined overhead rate = Estimated manufacturing overhead ÷ Estimated machine-hours
D) Predetermined overhead rate = Estimated manufacturing overhead ÷ Actual machine-hours

E) None of the above
F) B) and C)

Correct Answer

verifed

verified

Stoke Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Stoke Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A460. The following data were recorded for this job: -The amount of overhead applied in the Forming Department to Job A460 is closest to: A) $184,000.00 B) $184.00 C) $736.00 D) $664.00 During the current month the company started and finished Job A460. The following data were recorded for this job: Stoke Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A460. The following data were recorded for this job: -The amount of overhead applied in the Forming Department to Job A460 is closest to: A) $184,000.00 B) $184.00 C) $736.00 D) $664.00 -The amount of overhead applied in the Forming Department to Job A460 is closest to:


A) $184,000.00
B) $184.00
C) $736.00
D) $664.00

E) A) and B)
F) All of the above

Correct Answer

verifed

verified

Almaraz Corporation has two manufacturing departments--Forming and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Almaraz Corporation has two manufacturing departments--Forming and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.That predetermined manufacturing overhead rate is closest to: A) $6.62 B) $4.87 C) $4.10 D) $7.10 Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.That predetermined manufacturing overhead rate is closest to:


A) $6.62
B) $4.87
C) $4.10
D) $7.10

E) A) and D)
F) None of the above

Correct Answer

verifed

verified

Cardosa Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on 70,000 machine-hours,total fixed manufacturing overhead cost of $308,000,and a variable manufacturing overhead rate of $2.10 per machine-hour.Job M556,which was for 50 units of a custom product,was recently completed.The job cost sheet for the job contained the following data: Cardosa Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on 70,000 machine-hours,total fixed manufacturing overhead cost of $308,000,and a variable manufacturing overhead rate of $2.10 per machine-hour.Job M556,which was for 50 units of a custom product,was recently completed.The job cost sheet for the job contained the following data: Required: a.Calculate the total job cost for Job M556. b.Calculate the unit product cost for Job M556. Required: a.Calculate the total job cost for Job M556. b.Calculate the unit product cost for Job M556.

Correct Answer

verifed

verified

a.Estimated total manufacturing overhead...

View Answer

A bill of materials is a document that lists the type and quantity of each type of direct material needed to complete a unit of product.

A) True
B) False

Correct Answer

verifed

verified

Thrall Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Thrall Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Recently Job K125 was completed and required 160 machine-hours. Required: Calculate the amount of overhead applied to Job K125. Recently Job K125 was completed and required 160 machine-hours. Required: Calculate the amount of overhead applied to Job K125.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Marciante Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Marciante Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: -The estimated total manufacturing overhead for the Finishing Department is closest to: A) $71,500 B) $52,000 C) $34,794 D) $19,500 -The estimated total manufacturing overhead for the Finishing Department is closest to:


A) $71,500
B) $52,000
C) $34,794
D) $19,500

E) All of the above
F) A) and D)

Correct Answer

verifed

verified

Job 652 was recently completed.The following data have been recorded on its job cost sheet: Job 652 was recently completed.The following data have been recorded on its job cost sheet: The company applies manufacturing overhead on the basis of direct labor-hours.The predetermined overhead rate is $35 per direct labor-hour. Required: Compute the unit product cost that would appear on the job cost sheet for this job. The company applies manufacturing overhead on the basis of direct labor-hours.The predetermined overhead rate is $35 per direct labor-hour. Required: Compute the unit product cost that would appear on the job cost sheet for this job.

Correct Answer

verifed

verified

Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job J is closest to: A) $65,115 B) $67,720 C) $21,705 D) $43,410 During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job J is closest to: A) $65,115 B) $67,720 C) $21,705 D) $43,410 -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job J is closest to:


A) $65,115
B) $67,720
C) $21,705
D) $43,410

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

Levron Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $58,000, variable manufacturing overhead of $2.00 per machine-hour, and 20,000 machine-hours. The company has provided the following data concerning Job P978 which was recently completed: Levron Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $58,000, variable manufacturing overhead of $2.00 per machine-hour, and 20,000 machine-hours. The company has provided the following data concerning Job P978 which was recently completed: -The total job cost for Job P978 is closest to: A) $3,140 B) $892 C) $3,532 D) $3,032 -The total job cost for Job P978 is closest to:


A) $3,140
B) $892
C) $3,532
D) $3,032

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Gerstein Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.70 per direct labor-hour, and 50,000 direct labor-hours. The company recently completed Job M800 which required 150 direct labor-hours. -The amount of manufacturing overhead that would have been applied to all jobs during the period is closest to:


A) $831,600
B) $54,000
C) $774,900
D) $738,000

E) C) and D)
F) A) and B)

Correct Answer

verifed

verified

Giannitti Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year.Data for the upcoming year appear below: Giannitti Corporation bases its predetermined overhead rate on the estimated machine-hours for the upcoming year.Data for the upcoming year appear below: The predetermined overhead rate for the recently completed year was closest to: A) $29.39 per machine-hour B) $32.40 per machine-hour C) $32.81 per machine-hour D) $3.01 per machine-hour The predetermined overhead rate for the recently completed year was closest to:


A) $29.39 per machine-hour
B) $32.40 per machine-hour
C) $32.81 per machine-hour
D) $3.01 per machine-hour

E) C) and D)
F) None of the above

Correct Answer

verifed

verified

Cull Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $462,000, variable manufacturing overhead of $2.20 per machine-hour, and 60,000 machine-hours. The company has provided the following data concerning Job X455 which was recently completed: Cull Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $462,000, variable manufacturing overhead of $2.20 per machine-hour, and 60,000 machine-hours. The company has provided the following data concerning Job X455 which was recently completed: -If the company marks up its unit product costs by 20% then the selling price for a unit in Job X455 is closest to: A) $258.32 B) $190.80 C) $39.72 D) $238.32 -If the company marks up its unit product costs by 20% then the selling price for a unit in Job X455 is closest to:


A) $258.32
B) $190.80
C) $39.72
D) $238.32

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Most countries require some form of absorption costing for external reports.

A) True
B) False

Correct Answer

verifed

verified

Marius Corporation has two production departments,Casting and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Marius Corporation has two production departments,Casting and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job K895.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Finishing Department. b.Calculate the predetermined overhead rate for the Finishing Department. c.Calculate the amount of overhead applied in the Finishing Department to Job K895. During the current month the company started and finished Job K895.The following data were recorded for this job: Marius Corporation has two production departments,Casting and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job K895.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Finishing Department. b.Calculate the predetermined overhead rate for the Finishing Department. c.Calculate the amount of overhead applied in the Finishing Department to Job K895. Required: a.Calculate the estimated total manufacturing overhead for the Finishing Department. b.Calculate the predetermined overhead rate for the Finishing Department. c.Calculate the amount of overhead applied in the Finishing Department to Job K895.

Correct Answer

verifed

verified

a.Finishing Department overhead cost = F...

View Answer

Job cost sheets contain entries for actual direct material,actual direct labor,and actual manufacturing overhead cost incurred in completing a job.

A) True
B) False

Correct Answer

verifed

verified

Showing 121 - 140 of 292

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

255 Questions

Exam 4

Process Costing

138 Questions

Exam 5

Cost-Volume-Profit Relationships

260 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 7

Super-Variable Costing

49 Questions

Exam 8

Master Budgeting

234 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Differential Analysis: The Key to Decision Making

203 Questions

Exam 13

Capital Budgeting Decisions

179 Questions

Exam 14

Statement of Cash Flows

132 Questions

Exam 15

Financial Statement Analysis

289 Questions

Exam 16

Cost of Quality

66 Questions

Exam 17

Activity-Based Absorption Costing

20 Questions

Exam 18

The Predetermined Overhead Rate and Capacity

42 Questions

Exam 19

Job-Order Costing: a Microsoft Excel-Based Approach

28 Questions

Exam 20

Fifo Method

100 Questions

Exam 21

Service Department Allocations

60 Questions

Exam 22

Analyzing Mixed Costs

81 Questions

Exam 23

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 24

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 25

Standard Cost Systems: a Financial Reporting Perspective Using Microsoft Excel

138 Questions

Exam 26

Transfer Pricing

102 Questions

Exam 27

Service Department Charges

44 Questions

Exam 28

Pricing Decisions

149 Questions

Exam 29

The Concept of Present Value

16 Questions

Exam 30

Income Taxes and the Present Value Method

150 Questions

Exam 31

the Direct Method of Determining the Net Cash Provided by Operating Activities

56 Questions

Show Answer