Filters
Question type
Study Flashcards

Kalp Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Kalp Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job K928. The following data were recorded for this job: -The total job cost for Job K928 is closest to: A) $810 B) $4,275 C) $2,060 D) $2,215 During the current month the company started and finished Job K928. The following data were recorded for this job: Kalp Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job K928. The following data were recorded for this job: -The total job cost for Job K928 is closest to: A) $810 B) $4,275 C) $2,060 D) $2,215 -The total job cost for Job K928 is closest to:


A) $810
B) $4,275
C) $2,060
D) $2,215

E) B) and D)
F) All of the above

Correct Answer

verifed

verified

Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A319. The following data were recorded for this job: -The amount of overhead applied in the Customizing Department to Job A319 is closest to: A) $234.00 B) $786.00 C) $552.00 D) $91,700.00 During the current month the company started and finished Job A319. The following data were recorded for this job: Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A319. The following data were recorded for this job: -The amount of overhead applied in the Customizing Department to Job A319 is closest to: A) $234.00 B) $786.00 C) $552.00 D) $91,700.00 -The amount of overhead applied in the Customizing Department to Job A319 is closest to:


A) $234.00
B) $786.00
C) $552.00
D) $91,700.00

E) A) and D)
F) B) and C)

Correct Answer

verifed

verified

Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job L is closest to: A) $11,680 B) $28,780 C) $17,100 D) $29,900 During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job L is closest to: A) $11,680 B) $28,780 C) $17,100 D) $29,900 -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job L is closest to:


A) $11,680
B) $28,780
C) $17,100
D) $29,900

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Which of the following would usually be found on a job cost sheet under a normal cost system? Which of the following would usually be found on a job cost sheet under a normal cost system?

Correct Answer

verifed

verified

Carradine Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $105,000,variable manufacturing overhead of $3.00 per machine-hour,and 70,000 machine-hours.The company recently completed Job P233 which required 60 machine-hours.The amount of overhead applied to Job P233 is closest to:


A) $90
B) $270
C) $450
D) $180

E) None of the above
F) A) and D)

Correct Answer

verifed

verified

Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: -The amount of overhead applied in the Assembly Department to Job T288 is closest to: A) $508.00 B) $101,600.00 C) $388.00 D) $120.00 -The amount of overhead applied in the Assembly Department to Job T288 is closest to:


A) $508.00
B) $101,600.00
C) $388.00
D) $120.00

E) B) and D)
F) B) and C)

Correct Answer

verifed

verified

Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Assembly Department is closest to: A) $2.60 B) $4.70 C) $6.05 D) $2.10 During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Assembly Department is closest to: A) $2.60 B) $4.70 C) $6.05 D) $2.10 -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments.The departmental predetermined overhead rate in the Assembly Department is closest to:


A) $2.60
B) $4.70
C) $6.05
D) $2.10

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

If the overhead rate is computed annually based on the actual costs and activity for the year,the manufacturing overhead assigned to any particular job can be computed as soon as the job is completed.

A) True
B) False

Correct Answer

verifed

verified

Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $475,000 B) $285,000 C) $190,000 D) $285,004 Customizing Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $475,000 B) $285,000 C) $190,000 D) $285,004 The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $475,000 B) $285,000 C) $190,000 D) $285,004 The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $475,000 B) $285,000 C) $190,000 D) $285,004 Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $475,000 B) $285,000 C) $190,000 D) $285,004 Recently, Job P513 was completed with the following characteristics: Fee The first step is to calculate the estimated total overhead costs in the two departments. Machining Customizing The second step is to combine the estimated manufacturing overhead costs in the two departments ($44,400 + $21,200 = $65,600) to calculate the plantwide predetermined overhead rate as follow: The overhead applied to Job C is calculated as follows: Overhead applied to a particular job = Predetermined overhead rate x Machine-hours incurred by the job = $6.56 per MH x (4,100 MHs + 1,600 MHs) = $6.56 per MH x (5,700 MHs) = $37,392 Job C's manufacturing cost: Reference: CH02-Ref24 Prather Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job P513 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $475,000 B) $285,000 C) $190,000 D) $285,004 -The estimated total manufacturing overhead is closest to:


A) $475,000
B) $285,000
C) $190,000
D) $285,004

E) All of the above
F) B) and C)

Correct Answer

verifed

verified

Sullen Corporation uses a predetermined overhead rate base on machine-hours that it recalculates at the beginning of each year.The company has provided the following data for the most recent year. Sullen Corporation uses a predetermined overhead rate base on machine-hours that it recalculates at the beginning of each year.The company has provided the following data for the most recent year. Required: Determine the amount of manufacturing overhead that would have been applied to all jobs during the period. Required: Determine the amount of manufacturing overhead that would have been applied to all jobs during the period.

Correct Answer

verifed

verified

Franta Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on 70,000 direct labor-hours,total fixed manufacturing overhead cost of $238,000,and a variable manufacturing overhead rate of $2.70 per direct labor-hour.Job P873,which was for 50 units of a custom product,was recently completed.The job cost sheet for the job contained the following data: Franta Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on 70,000 direct labor-hours,total fixed manufacturing overhead cost of $238,000,and a variable manufacturing overhead rate of $2.70 per direct labor-hour.Job P873,which was for 50 units of a custom product,was recently completed.The job cost sheet for the job contained the following data: Required: Calculate the unit product cost for Job P873. Required: Calculate the unit product cost for Job P873.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T629 was completed with the following characteristics: -The amount of overhead applied to Job T629 is closest to: A) $1,620 B) $780 C) $1,200 D) $420 Recently, Job T629 was completed with the following characteristics: Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T629 was completed with the following characteristics: -The amount of overhead applied to Job T629 is closest to: A) $1,620 B) $780 C) $1,200 D) $420 -The amount of overhead applied to Job T629 is closest to:


A) $1,620
B) $780
C) $1,200
D) $420

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T272. The following data were recorded for this job: -The amount of overhead applied in the Customizing Department to Job T272 is closest to: A) $76,200.00 B) $762.00 C) $564.00 D) $198.00 During the current month the company started and finished Job T272. The following data were recorded for this job: Eisentrout Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T272. The following data were recorded for this job: -The amount of overhead applied in the Customizing Department to Job T272 is closest to: A) $76,200.00 B) $762.00 C) $564.00 D) $198.00 -The amount of overhead applied in the Customizing Department to Job T272 is closest to:


A) $76,200.00
B) $762.00
C) $564.00
D) $198.00

E) C) and D)
F) B) and C)

Correct Answer

verifed

verified

Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job A is closest to: A) $90,707 B) $27,487 C) $82,461 D) $54,974 During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: Janicki Corporation has two manufacturing departments--Machining and Customizing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job A and Job J. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job A is closest to: A) $90,707 B) $27,487 C) $82,461 D) $54,974 -Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours and uses a markup of 50% on manufacturing cost to establish selling prices.The calculated selling price for Job A is closest to:


A) $90,707
B) $27,487
C) $82,461
D) $54,974

E) A) and B)
F) None of the above

Correct Answer

verifed

verified

Pasko Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on the following data: Pasko Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on the following data: Recently Job P660 was completed with the following characteristics: Required: Calculate the selling price for Job P660 if the company marks up its unit product costs by 20%. Recently Job P660 was completed with the following characteristics: Pasko Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours.The company based its predetermined overhead rate for the current year on the following data: Recently Job P660 was completed with the following characteristics: Required: Calculate the selling price for Job P660 if the company marks up its unit product costs by 20%. Required: Calculate the selling price for Job P660 if the company marks up its unit product costs by 20%.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Tiff Corporation has two production departments, Casting and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Tiff Corporation has two production departments, Casting and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job P131. The following data were recorded for this job: -The amount of overhead applied in the Assembly Department to Job P131 is closest to: A) $228.00 B) $558.00 C) $65,500.00 D) $786.00 During the current month the company started and finished Job P131. The following data were recorded for this job: Tiff Corporation has two production departments, Casting and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job P131. The following data were recorded for this job: -The amount of overhead applied in the Assembly Department to Job P131 is closest to: A) $228.00 B) $558.00 C) $65,500.00 D) $786.00 -The amount of overhead applied in the Assembly Department to Job P131 is closest to:


A) $228.00
B) $558.00
C) $65,500.00
D) $786.00

E) C) and D)
F) A) and B)

Correct Answer

verifed

verified

Bolander Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Bolander Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job M825 was completed with the following characteristics: -The predetermined overhead rate is closest to: A) $8.80 per machine-hour B) $6.50 per machine-hour C) $2.30 per machine-hour D) $4.20 per machine-hour Recently, Job M825 was completed with the following characteristics: Bolander Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job M825 was completed with the following characteristics: -The predetermined overhead rate is closest to: A) $8.80 per machine-hour B) $6.50 per machine-hour C) $2.30 per machine-hour D) $4.20 per machine-hour -The predetermined overhead rate is closest to:


A) $8.80 per machine-hour
B) $6.50 per machine-hour
C) $2.30 per machine-hour
D) $4.20 per machine-hour

E) All of the above
F) A) and D)

Correct Answer

verifed

verified

Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job L is closest to: A) $27,830 B) $11,840 C) $25,940 D) $14,100 During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: Merati Corporation has two manufacturing departments--Forming and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job L is closest to: A) $27,830 B) $11,840 C) $25,940 D) $14,100 -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job L is closest to:


A) $27,830
B) $11,840
C) $25,940
D) $14,100

E) A) and B)
F) B) and C)

Correct Answer

verifed

verified

Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 20% on manufacturing cost to establish selling prices.The calculated selling price for Job C is closest to: A) $87,666 B) $68,920 C) $13,784 D) $82,704 During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 20% on manufacturing cost to establish selling prices.The calculated selling price for Job C is closest to: A) $87,666 B) $68,920 C) $13,784 D) $82,704 -Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.Further assume that the company uses a markup of 20% on manufacturing cost to establish selling prices.The calculated selling price for Job C is closest to:


A) $87,666
B) $68,920
C) $13,784
D) $82,704

E) None of the above
F) A) and B)

Correct Answer

verifed

verified

If a job is not completed at year end,then no manufacturing overhead cost would be applied to that job when a predetermined overhead rate is used.

A) True
B) False

Correct Answer

verifed

verified

Showing 141 - 160 of 292

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

255 Questions

Exam 4

Process Costing

138 Questions

Exam 5

Cost-Volume-Profit Relationships

260 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 7

Super-Variable Costing

49 Questions

Exam 8

Master Budgeting

234 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Differential Analysis: The Key to Decision Making

203 Questions

Exam 13

Capital Budgeting Decisions

179 Questions

Exam 14

Statement of Cash Flows

132 Questions

Exam 15

Financial Statement Analysis

289 Questions

Exam 16

Cost of Quality

66 Questions

Exam 17

Activity-Based Absorption Costing

20 Questions

Exam 18

The Predetermined Overhead Rate and Capacity

42 Questions

Exam 19

Job-Order Costing: a Microsoft Excel-Based Approach

28 Questions

Exam 20

Fifo Method

100 Questions

Exam 21

Service Department Allocations

60 Questions

Exam 22

Analyzing Mixed Costs

81 Questions

Exam 23

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 24

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 25

Standard Cost Systems: a Financial Reporting Perspective Using Microsoft Excel

138 Questions

Exam 26

Transfer Pricing

102 Questions

Exam 27

Service Department Charges

44 Questions

Exam 28

Pricing Decisions

149 Questions

Exam 29

The Concept of Present Value

16 Questions

Exam 30

Income Taxes and the Present Value Method

150 Questions

Exam 31

the Direct Method of Determining the Net Cash Provided by Operating Activities

56 Questions

Show Answer