Filters
Question type
Study Flashcards

Marioni Corporation has two manufacturing departments--Forming and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Marioni Corporation has two manufacturing departments--Forming and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job B and Job H.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job B is closest to: A) $6,720 B) $33,600 C) $40,320 D) $39,480 During the most recent month,the company started and completed two jobs--Job B and Job H.There were no beginning inventories.Data concerning those two jobs follow: Marioni Corporation has two manufacturing departments--Forming and Assembly.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job B and Job H.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job B is closest to: A) $6,720 B) $33,600 C) $40,320 D) $39,480 Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.The manufacturing overhead applied to Job B is closest to:


A) $6,720
B) $33,600
C) $40,320
D) $39,480

E) B) and C)
F) None of the above

Correct Answer

verifed

verified

Juanita Corporation uses a job-order costing system and applies overhead on the basis of direct labor cost.At the end of October,Juanita had one job still in process.The job cost sheet for this job contained the following information: Juanita Corporation uses a job-order costing system and applies overhead on the basis of direct labor cost.At the end of October,Juanita had one job still in process.The job cost sheet for this job contained the following information: An additional $100 of labor was needed in November to complete this job.For this job,how much should Juanita have transferred to finished goods inventory in November when it was completed? A) $1,330 B) $500 C) $1,230 D) $1,730 An additional $100 of labor was needed in November to complete this job.For this job,how much should Juanita have transferred to finished goods inventory in November when it was completed?


A) $1,330
B) $500
C) $1,230
D) $1,730

E) B) and C)
F) A) and D)

Correct Answer

verifed

verified

Atteberry Corporation has two manufacturing departments--Machining and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Atteberry Corporation has two manufacturing departments--Machining and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job E and Job L.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job E is closest to: A) $24,500 B) $35,796 C) $13,400 D) $73,696 During the most recent month,the company started and completed two jobs--Job E and Job L.There were no beginning inventories.Data concerning those two jobs follow: Atteberry Corporation has two manufacturing departments--Machining and Finishing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job E and Job L.There were no beginning inventories.Data concerning those two jobs follow: Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job E is closest to: A) $24,500 B) $35,796 C) $13,400 D) $73,696 Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.The total manufacturing cost assigned to Job E is closest to:


A) $24,500
B) $35,796
C) $13,400
D) $73,696

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Branin Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $160,000, variable manufacturing overhead of $3.40 per direct labor-hour, and 80,000 direct labor-hours. The company has provided the following data concerning Job A578 which was recently completed: Branin Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $160,000, variable manufacturing overhead of $3.40 per direct labor-hour, and 80,000 direct labor-hours. The company has provided the following data concerning Job A578 which was recently completed: -The amount of overhead applied to Job A578 is closest to: A) $500 B) $1,350 C) $2,200 D) $850 -The amount of overhead applied to Job A578 is closest to:


A) $500
B) $1,350
C) $2,200
D) $850

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Cull Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $462,000, variable manufacturing overhead of $2.20 per machine-hour, and 60,000 machine-hours. The company has provided the following data concerning Job X455 which was recently completed: Cull Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $462,000, variable manufacturing overhead of $2.20 per machine-hour, and 60,000 machine-hours. The company has provided the following data concerning Job X455 which was recently completed: -The unit product cost for Job X455 is closest to: A) $86.60 B) $159.00 C) $198.60 D) $49.65 -The unit product cost for Job X455 is closest to:


A) $86.60
B) $159.00
C) $198.60
D) $49.65

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Hickingbottom Corporation has two production departments, Forming and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Hickingbottom Corporation has two production departments, Forming and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job M381. The following data were recorded for this job: -The total job cost for Job M381 is closest to: A) $2,206 B) $616 C) $4,076 D) $1,870 During the current month the company started and finished Job M381. The following data were recorded for this job: Hickingbottom Corporation has two production departments, Forming and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job M381. The following data were recorded for this job: -The total job cost for Job M381 is closest to: A) $2,206 B) $616 C) $4,076 D) $1,870 -The total job cost for Job M381 is closest to:


A) $2,206
B) $616
C) $4,076
D) $1,870

E) A) and C)
F) None of the above

Correct Answer

verifed

verified

Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: Kubes Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.50 per direct labor-hour, and 30,000 direct labor-hours. The company has provided the following data concerning Job A477 which was recently completed: -The amount of overhead applied to Job A477 is closest to: A) $300 B) $350 C) $650 D) $1,000 -The amount of overhead applied to Job A477 is closest to:


A) $300
B) $350
C) $650
D) $1,000

E) A) and D)
F) B) and D)

Correct Answer

verifed

verified

Johansen Corporation uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs.The Corporation has provided the following estimated costs for the next year: Johansen Corporation uses a predetermined overhead rate based on direct labor-hours to apply manufacturing overhead to jobs.The Corporation has provided the following estimated costs for the next year: Jameson estimates that 20,000 direct labor-hours will be worked during the year.The predetermined overhead rate per hour will be: A) $2.00 per direct labor-hour B) $2.79 per direct labor-hour C) $3.00 per direct labor-hour D) $4.00 per direct labor-hour Jameson estimates that 20,000 direct labor-hours will be worked during the year.The predetermined overhead rate per hour will be:


A) $2.00 per direct labor-hour
B) $2.79 per direct labor-hour
C) $3.00 per direct labor-hour
D) $4.00 per direct labor-hour

E) None of the above
F) B) and C)

Correct Answer

verifed

verified

Stoke Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Stoke Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A460. The following data were recorded for this job: -The amount of overhead applied in the Assembly Department to Job A460 is closest to: A) $415.00 B) $150.00 C) $565.00 D) $79,100.00 During the current month the company started and finished Job A460. The following data were recorded for this job: Stoke Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A460. The following data were recorded for this job: -The amount of overhead applied in the Assembly Department to Job A460 is closest to: A) $415.00 B) $150.00 C) $565.00 D) $79,100.00 -The amount of overhead applied in the Assembly Department to Job A460 is closest to:


A) $415.00
B) $150.00
C) $565.00
D) $79,100.00

E) C) and D)
F) All of the above

Correct Answer

verifed

verified

Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A803. The following data were recorded for this job: -The amount of overhead applied in the Machining Department to Job A803 is closest to: A) $828.00 B) $792.00 C) $171.00 D) $174,800.00 During the current month the company started and finished Job A803. The following data were recorded for this job: Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A803. The following data were recorded for this job: -The amount of overhead applied in the Machining Department to Job A803 is closest to: A) $828.00 B) $792.00 C) $171.00 D) $174,800.00 -The amount of overhead applied in the Machining Department to Job A803 is closest to:


A) $828.00
B) $792.00
C) $171.00
D) $174,800.00

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Branin Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $160,000, variable manufacturing overhead of $3.40 per direct labor-hour, and 80,000 direct labor-hours. The company has provided the following data concerning Job A578 which was recently completed: Branin Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $160,000, variable manufacturing overhead of $3.40 per direct labor-hour, and 80,000 direct labor-hours. The company has provided the following data concerning Job A578 which was recently completed: -The total job cost for Job A578 is closest to: A) $11,065 B) $10,350 C) $2,065 D) $9,715 -The total job cost for Job A578 is closest to:


A) $11,065
B) $10,350
C) $2,065
D) $9,715

E) None of the above
F) All of the above

Correct Answer

verifed

verified

Rocher Corporation has two production departments,Casting and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Rocher Corporation has two production departments,Casting and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job A394.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Casting Department. b.Calculate the predetermined overhead rate for the Casting Department. c.Calculate the amount of overhead applied in the Casting Department to Job A394. During the current month the company started and finished Job A394.The following data were recorded for this job: Rocher Corporation has two production departments,Casting and Finishing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: During the current month the company started and finished Job A394.The following data were recorded for this job: Required: a.Calculate the estimated total manufacturing overhead for the Casting Department. b.Calculate the predetermined overhead rate for the Casting Department. c.Calculate the amount of overhead applied in the Casting Department to Job A394. Required: a.Calculate the estimated total manufacturing overhead for the Casting Department. b.Calculate the predetermined overhead rate for the Casting Department. c.Calculate the amount of overhead applied in the Casting Department to Job A394.

Correct Answer

verifed

verified

a.Casting Department overhead cost = Fix...

View Answer

Swango Corporation has two production departments,Casting and Customizing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: Swango Corporation has two production departments,Casting and Customizing.The company uses a job-order costing system and computes a predetermined overhead rate in each production department.The Casting Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours.At the beginning of the current year,the company had made the following estimates: The estimated total manufacturing overhead for the Customizing Department is closest to: A) $24,000 B) $110,400 C) $86,400 D) $60,379 The estimated total manufacturing overhead for the Customizing Department is closest to:


A) $24,000
B) $110,400
C) $86,400
D) $60,379

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Petru Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Petru Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Recently Job P987 was completed with the following characteristics: Required: Calculate the unit product cost for Job P987. Recently Job P987 was completed with the following characteristics: Petru Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on the following data: Recently Job P987 was completed with the following characteristics: Required: Calculate the unit product cost for Job P987. Required: Calculate the unit product cost for Job P987.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Assigning manufacturing overhead to a specific job is complicated by all of the below except:


A) Manufacturing overhead is an indirect cost that is either impossible or difficult to trace to a particular job.
B) Manufacturing overhead is incurred only to support some jobs.
C) Manufacturing overhead consists of both variable and fixed costs.
D) The average cost of actual fixed manufacturing overhead expenses will vary depending on how many units are produced in a period.

E) All of the above
F) A) and B)

Correct Answer

verifed

verified

Moscone Corporation bases its predetermined overhead rate on the estimated labor-hours for the upcoming year.At the beginning of the most recently completed year,the company estimated the labor-hours for the upcoming year at 78,000 labor-hours.The estimated variable manufacturing overhead was $9.99 per labor-hour and the estimated total fixed manufacturing overhead was $985,920. Required: Compute the company's predetermined overhead rate.

Correct Answer

verifed

verified

Estimated total manufacturing ...

View Answer

Gerstein Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $90,000, variable manufacturing overhead of $3.70 per direct labor-hour, and 50,000 direct labor-hours. The company recently completed Job M800 which required 150 direct labor-hours. -The predetermined overhead rate is closest to:


A) $1.80 per direct labor-hour
B) $5.50 per direct labor-hour
C) $9.20 per direct labor-hour
D) $3.70 per direct labor-hour

E) B) and D)
F) A) and D)

Correct Answer

verifed

verified

Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T629 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $168,000 B) $312,002 C) $312,000 D) $480,000 Recently, Job T629 was completed with the following characteristics: Harootunian Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T629 was completed with the following characteristics: -The estimated total manufacturing overhead is closest to: A) $168,000 B) $312,002 C) $312,000 D) $480,000 -The estimated total manufacturing overhead is closest to:


A) $168,000
B) $312,002
C) $312,000
D) $480,000

E) None of the above
F) All of the above

Correct Answer

verifed

verified

Sonneborn Corporation has two manufacturing departments--Molding and Customizing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: Sonneborn Corporation has two manufacturing departments--Molding and Customizing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job D and Job G.There were no beginning inventories.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job D. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job G. c.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job D? d.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job G? During the most recent month,the company started and completed two jobs--Job D and Job G.There were no beginning inventories.Data concerning those two jobs follow: Sonneborn Corporation has two manufacturing departments--Molding and Customizing.The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month,the company started and completed two jobs--Job D and Job G.There were no beginning inventories.Data concerning those two jobs follow: Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job D. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job G. c.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job D? d.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job G? Required: a.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job D. b.Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours.Calculate the amount of manufacturing overhead applied to Job G. c.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job D? d.Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments.How much manufacturing overhead will be applied to Job G?

Correct Answer

verifed

verified

a.The first step is to calculate the est...

View Answer

Valvano Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours.The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $440,000,variable manufacturing overhead of $2.20 per machine-hour,and 50,000 machine-hours.The estimated total manufacturing overhead is closest to:


A) $440,000
B) $110,000
C) $440,002
D) $550,000

E) A) and B)
F) All of the above

Correct Answer

verifed

verified

Showing 161 - 180 of 292

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 3

Job-Order Costing: Cost Flows and External Reporting

255 Questions

Exam 4

Process Costing

138 Questions

Exam 5

Cost-Volume-Profit Relationships

260 Questions

Exam 6

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 7

Super-Variable Costing

49 Questions

Exam 8

Master Budgeting

234 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Differential Analysis: The Key to Decision Making

203 Questions

Exam 13

Capital Budgeting Decisions

179 Questions

Exam 14

Statement of Cash Flows

132 Questions

Exam 15

Financial Statement Analysis

289 Questions

Exam 16

Cost of Quality

66 Questions

Exam 17

Activity-Based Absorption Costing

20 Questions

Exam 18

The Predetermined Overhead Rate and Capacity

42 Questions

Exam 19

Job-Order Costing: a Microsoft Excel-Based Approach

28 Questions

Exam 20

Fifo Method

100 Questions

Exam 21

Service Department Allocations

60 Questions

Exam 22

Analyzing Mixed Costs

81 Questions

Exam 23

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 24

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 25

Standard Cost Systems: a Financial Reporting Perspective Using Microsoft Excel

138 Questions

Exam 26

Transfer Pricing

102 Questions

Exam 27

Service Department Charges

44 Questions

Exam 28

Pricing Decisions

149 Questions

Exam 29

The Concept of Present Value

16 Questions

Exam 30

Income Taxes and the Present Value Method

150 Questions

Exam 31

the Direct Method of Determining the Net Cash Provided by Operating Activities

56 Questions

Show Answer